Ad
related to: swaraj 744 fe hp driver
Search results
Results From The WOW.Com Content Network
1981: Setting-up of Swaraj Combine Division. 1981: Setting-up of Swaraj Foundry Division. 1982: Swaraj Harvester Combine rolls out. 1983: Introduction of Swaraj 855: PTL's HP-range became broader than that of all competitors combined. 1984: Incorporation of Swaraj Mazda Limited. 1985: LCV's roll-out from Swaraj Mazda Ltd.
The straight-8 600 hp (450 kW) Winton 201-A engine moved the exhaust stacks off-center to the engineer's left, while the N series' were central. The Winton-engined switchers can be distinguished from later EMD 567 -engined units by small louvres at the top front sides of their hoods, as well as top-of-hood ventilation through several lifting ...
At that point, it was decided to christen a name for the product – signifying Indian, easy to pronounce and signifying power and grace. The name 'Swaraj', was approved by the then Prime Minister, Mrs Indira Gandhi. In 1970, the Government of Punjab acquired the Swaraj tractor's design and established Punjab Tractors Limited (PTL).
The FM H-12-44 was a switcher locomotive produced by Fairbanks-Morse from May 1950 until March 1961. The units had a 1,200-horsepower (890 kW), six-cylinder opposed piston engine prime mover, and were configured in a B-B wheel arrangement mounted atop a pair of two-axle AAR Type-A switcher trucks, with all axles powered and geared for a top speed of 60 miles per hour (97 km/h).
Ford Motor Company sponsored five drivers (Gas Ronda, Jerry Harvey, Hubert Platt, "Dyno Don" Nicholson, Kenneth McLellan, and Al Joniec) to race six 428 CJ-equipped Mustangs. They raced in classes C Stock Automatic (C/SA, 9 to 9.49 lb/hp (5.47 to 5.77 kg/kW)), based on advertised horsepower) and Super Stock E (SS/E or SS/EA, manual or automatic ...
The 2SZ-FE is 1.3 L (1,298 cc). Bore and stroke is 72 mm × 79.7 mm (2.83 in × 3.14 in), with a compression ratio of 11.0:1. Output is 64 kW (86 hp; 87 PS) at 6000 rpm with 122 N⋅m (90 lbf⋅ft) of torque at 4200 rpm. Daihatsu's internal code for this engine is labeled as K3-DE/VE and the turbocharged version as K3-VET.
The 1KR-FE is a 1.0 L (998 cc) version built in Japan and Poland.Bore and stroke is 71 mm × 84 mm (2.80 in × 3.31 in), with a compression ratio of 10.5:1. Output is 67 PS (49 kW; 66 bhp) at 6000 rpm with 91 N⋅m (67 lb⋅ft) of torque at 4800 rpm - and a rev-limit of 6500 rpm - or 71 PS (52 kW; 70 bhp) at 6000 rpm with 94 N⋅m (69 lb⋅ft) of torque at 3600 rpm.
The 2UZ-FE was a 4.7 L; 284.6 cu in (4,663 cc) version built in Tahara, Aichi, Japan and at Toyota Motor Manufacturing Alabama. Unlike its other UZ counterparts, this version uses a cast iron block to increase durability, as it was designed for low-revving, high-torque pickup and SUV applications.