Search results
Results From The WOW.Com Content Network
The engine has a displacement of 3.56 liters and weighs 235 kg (518 lb). [1] A two-port Carter carburetor and intake are positioned between the cylinder banks. The crossflow cylinder heads are made from a cast iron alloy, and the five-bearing camshaft is constructed from a case-hardened steel alloy.
The Volvo Engine Diesel 4 is a four-cylinder engine with 2.0L displacement. It is used by Volvo in certain markets and is the final family of Volvo Cars diesel engines after they announced in 2017 that they would no longer develop diesel engines. [ 3 ]
These engines were used by IHC for some heavy-duty applications until 1935, although their own large engines (525 cu in (8.6 L) FBD and 648 cu in (10.6 L) FEB) had appeared in 1932. [6] The medium-duty 1930 A-series trucks received the all-new 278.7 cu in (4.6 L) FB-3 six-cylinder engine, with overhead valves and seven main bearings .
Modern diesel engines for lorries have to be both extremely reliable and very fuel efficient. Common-rail direct injection, turbocharging and four valves per cylinder are standard. Displacements range from 4.5 to 15.5 litres, with power-to-mass ratios of 2.5–3.5 kg·kW −1 for heavy duty and 2.0–3.0 kg·kW −1 for medium duty engines.
Engine configuration & engine displacement. 60-degree V6 engine, single- and twin-turbo diesel, 2,720 cc (2.7 L; 166.0 cu in), bore x stroke 81 mm × 88 mm (3.19 in × 3.46 in), compression ratio 17.3:1 Cylinder block & crankcase. Compacted graphite iron cross bolted block Cylinder heads & valvetrain
6.2L fitted to a 1987 HMMWV. The original 6.2 L (379 cu in) diesel V8 was introduced in 1982 for the Chevrolet C/K and was produced until 1993. The 6.2L diesel emerged as a high-fuel-economy alternative to the V8 gasoline engine lineup, and achieved better mileage than Chevrolet's 4.3L V6 gasoline engine of the 1980s, at a time when the market was focused on power rather than efficiency.
Since there is no room in the V between the cylinder banks for an intake system, all the intakes are on one side of the engine, and all the exhausts are on the other side. It uses a firing order of 1-5-3-6-2-4 (which is the firing order used by most straight-six engines), rather than the common V6 firing order of 1-2-3-4-5-6 or 1-6-5-4-3-2.
A planned 2.9 L; 179.1 cu in (2,935 cc) double overhead camshaft V6 engine, featuring four valves-per-cylinder and common-rail direct fuel injection. Developed for General Motors but stopped at the end of 2008; after Cadillac left the European market and Saab was put for sale, GM had no use for that engine.