Search results
Results From The WOW.Com Content Network
A pitot–static system is a system of pressure-sensitive instruments that is most often used in aviation to determine an aircraft's airspeed, Mach number, altitude, and altitude trend. [1] A pitot–static system generally consists of a pitot tube, a static port, and the pitot–static instruments. [2]
ADIRUs are part of the air data inertial reference system, which, on the Airbus is linked to eight air data modules: three are linked to pitot tubes and five are linked to static sources. Information from the ADIRU is fed into one of several flight control computers (primary and secondary flight control).
The blockage of all of the static ports is one of the few common-failure modes resulting in total failure of multiple basic flight instruments and, as such, is regarded as one of the most serious faults that can occur in avionics systems. [12] The design of the aircraft did not incorporate a system of maintenance covers for the static ports.
A pitot-static system generally consists of a pitot tube, a static port, and the pitot-static instruments. [5] Errors in pitot-static system readings can be extremely dangerous as the information obtained from the pitot static system, such as airspeed, is potentially safety-critical. Several commercial airline incidents and accidents have been ...
The trailing cone system trails at least one fuselage length behind the aircraft (SpaceAge Control) via a high-strength pressure tube. Static pressure is measured forward of the cone by several static ports. [3] The cone stabilizes and aligns the ports relative to the freestream airflow. [4]
The B-2's combat use preceded a USAF declaration of "full operational capability" in December 2003. [7] The Pentagon's Operational Test and Evaluation 2003 Annual Report noted that the B-2's serviceability for Fiscal Year 2003 was still inadequate, mainly due to the maintainability of the B-2's low observable coatings.
As all information from the sensors is transmitted electrically, routing of pitot and static pressure lines through the aircraft and associated maintenance tasks is avoided. [ 5 ] In simpler aircraft and helicopters, the air data computers, generally two in number, and smaller, lighter and simpler than an ADIRU, may be called air data units ...
The air pressure in the vicinity of the static port is conveyed by a conduit to the altimeter and the airspeed indicator. This static port and the conduit constitute the aircraft's static system. The objective of the static system is to sense the pressure of the air at the altitude at which the aircraft is flying.