Ads
related to: f250 front axle shaft removal
Search results
Results From The WOW.Com Content Network
The 2022 Ford Bronco Raptor utilizes an AdvanTEK M235 (not Dana 50) solid rear axle with a 235mm (9.25 in) ring gear and electronic locking differential. The ratio is 4.70:1. [2] The 2023+ Ford Super Duty F-250 and F-350 come equipped with the Dana Advantek M235 (not Dana 50) front axle in high pinion configuration.
The Dana Holding Corporation manufactured the TTB axle for Ford. It uses a universal joint in the center that allows the wheels to move independently of each other. The differential is offset to the driver's side, and a slip yoke is used on the long axle side to allow the shaft to change length.
On two-wheel-drive F-250 and F-350 models, the Twin-I-Beam independent front suspension with coil springs was used; their 4×4 counterparts were equipped with solid front axle (Dana 50 and Dana 60) with leaf springs. For 2005, the front suspension was updated as 4×4 trucks were converted to front coil springs; to reduce unsprung weight, the ...
The Dana/Spicer Model 70 is an automotive axle manufactured by Dana Holding Corporation and has been used in OEM heavy duty applications by Chevrolet, Dodge, and Ford.It can be identified by its straight axle tubes, 10 bolt asymmetrical cover, and a "70" cast in to the housing, which is visually similar to the Dana 60.
The semi float variation is less common and was used in F-250 trucks with a lower GVWR (7200) all the way through 1996. The 10th generation Ford F-150 offered this axle in the light-duty F-250 trucks from 1997 to 1999. For model year 2000 - 2004 trucks, the F-150 7700 offered this axle and the F-250 light duty was discontinued.
The F-150 4×4 continued the use of the Dana 44 Twin-Traction Beam axle from the 1980–1991 trucks, and the Ford 8.8" rear straight axle. The 4×4 F-250 carried the Dana 50 Twin Traction Beam axle, the Sterling 10.25 from the previous generation for the rear; full-float on the F-250 HD and the 4×4 F-350 used the Dana 60 front straight axle ...
Axle shaft diameter 1.41” Front (32 spline) 1.46” Rear (32 spline) 1.50” Front (35 spline) 1.50” Rear (35 spline) Inner axle shaft splines: 16, 23, 30, 32, 33 or 35 Aftermarket inner axle shaft splines: 40 for after market, high performance axles, equivalent to Dana 70 components; Pinion shaft diameter: 1.625" Pinion shaft splines: 10 or 29
The Dana 44 rear axle first saw use in the 1940s and is still in use today. The Dana 44 has a GAWR up to 3,500 lb (1,600 kg) and is a semi-floating type, having one bearing on the end of the axle shaft which carries the weight of the vehicle on the axle and also allows axle rotation.