Search results
Results From The WOW.Com Content Network
The idle line state is when the device is connected to the host with a pull-up on either D+ (for full speed USB 1.x) or D− (for low speed USB 1.x), with transmitter output on both host and device is set to high impedance (hi-Z) (disconnected output). A USB device pulls one of the data lines high with a 1.5 kΩ resistor.
USB communications device class (or USB CDC) is a composite Universal Serial Bus device class. The communications device class is used for computer networking devices akin to a network card , providing an interface for transmitting Ethernet or ATM frames onto some physical media.
In technical terms, the concatenated SMS could also be referred to as a PDU Mode SMS [dubious – discuss].The number of parts that a multi-part or PDU mode SMS message may contain depends technically upon a header message but mostly upon the device sending or receiving the SMS and also upon the service provider.
It is intended by designers that the line out of one device be connected to the line input of another. Line inputs are designed to accept voltage levels in the range provided by line outputs. Impedances, on the other hand, are deliberately not matched from output to input. The impedance of a line input is typically around 10 kΩ. When driven by ...
DSL broadband internet connections cannot work on a DACS line as they rely on a copper pair running all the way to the telephone exchange. Since BT's traditional telephone line service is contractually only required to support voice and fax communication, BT are not obliged to remove a DACS because of problems with 56 kbit/s modems.
Switched capacitor DAC contains a parallel capacitor network. Individual capacitors are connected or disconnected with switches based on the input. The R-2R ladder DAC which is a binary-weighted DAC that uses a repeating cascaded structure of resistor values R and 2R. This improves the precision due to the relative ease of producing equal ...
A number of extensions to the USB Specifications have progressively further increased the maximum allowable V_BUS voltage: starting with 6.0 V with USB BC 1.2, [42] to 21.5 V with USB PD 2.0 [43] and 50.9 V with USB PD 3.1, [43] while still maintaining backwards compatibility with USB 2.0 by requiring various forms of handshake before ...
Hidden nodes in a wireless network are nodes that are out of range of other nodes or a collection of nodes. Consider a physical star topology with an access point with many nodes surrounding it in a circular fashion: each node is within communication range of the AP, but the nodes cannot communicate with each other.