Ads
related to: t56 magnum sequential shifter assembly
Search results
Results From The WOW.Com Content Network
The T-56 six speed manual transmission has been used in a wide range of vehicles from General Motors, Dodge, and Ford Motor Company.The transmission was originally designed and built by BorgWarner for the Dodge Viper later being used by GM in 1992 for the generation II and later engines, but from 1998 was built by Tremec, though nothing changed internally.
The TR-6060 contains removable wear pads on the shift forks, and uses aluminum alloys for the main case, extension housing, and clutch housing. It is a double overdrive transmission. The TR-6060 is manufactured by TREMEC (formerly Transmission Technologies Corporation ) and is rated for 430 lb⋅ft (580 N⋅m) to 650 lb⋅ft (880 N⋅m) of ...
2005-2020 Chrysler A580 / W5A580, 5-speed automatic. This was a Chrysler adaptation of the Mercedes 722.6 (the 722.6 was an adaptation of the ZF 5HP30). The A580 was first labelled as the NAG1. Commonly found in the 300, Magnum, Charger, Challenger, WK/WK2/WD Grand Cherokee and Durango (through 2013), Wrangler, and some Dodge Ram pickups.
Evolution of the T56 has been achieved through increases in pressure ratio and turbine temperature. The T56-A-14 installed on the P-3 Orion has a 4,591 shp (3,424 kW) rating with a pressure ratio of 9.25:1 while the T56-A-427 fitted to the E-2 Hawkeye has a 5,250 shp (3,915 kW) rating and a 12:1 pressure ratio.
Gear shift lever on a motorcycle (above the toe of the rider's boot) A sequential manual transmission is unsynchronized, and allows the driver to select either the next gear (e.g. shifting from first gear to second gear) or the previous gear (e.g., shifting from third gear to second gear), operated either via electronic paddle-shifters mounted behind the steering wheel or with a sequential ...
Top and side view, with Hurst shifter. The Toploader comprises two components: the main case, which encloses the gears, input and counter shaft, and the tailhousing, which encloses the speedometer gear and output shaft. The main case measures 10" in length, while the tailhousing measures 14", 15 1 ⁄ 2" or 17", depending on the application.