Search results
Results From The WOW.Com Content Network
An interesting feature of all three German jet engine designs that saw production of any kind before May 1945: the German BMW 003, Junkers Jumo 004 and Heinkel HeS 011 axial-flow turbojet engine designs was the starter system, which consisted of a Riedel 10 hp (7.5 kW) flat twin two-stroke air-cooled engine hidden in the intake, and essentially ...
The fuel system as explained above is one of the two systems required for starting the engine. The other is the actual ignition of the air/fuel mixture in the chamber. Usually, an auxiliary power unit is used to start the engines. It has a starter motor which has a high torque transmitted to the compressor unit. When the optimum speed is ...
Air impingement starting was not used for US military aircraft after the F-4B, A-5A [6] and F-5 as the pneumatic energy requirement was several times greater than when using an air turbine starter. The gas turbine compressor required to start a J79 with impingement starting was sufficient to start two J79 engines simultaneously in a B-58 when ...
Compared to conventional piston engines, turbine engines generally require less maintenance, last longer, and start more easily in cold conditions; [9] the A-831 started properly at temperatures as low as −20 °F (−29 °C). [44] The first car to receive an A-831 was a Plymouth Fury. [34]
A gas turbine or gas turbine engine is a type of continuous flow internal combustion engine. [1] The main parts common to all gas turbine engines form the power-producing part (known as the gas generator or core) and are, in the direction of flow: a rotating gas compressor; a combustor; a compressor-driving turbine.
The engine weighs approximately 2,500 lb (1,100 kg) and occupies a volume of 40 cu ft (1.1 m 3), measuring 63 in × 40 in × 28 in (1,600 mm × 1,020 mm × 710 mm). [4] The engine can use a variety of fuels, including jet fuel, gasoline, diesel and marine diesel. [2] The engine is a three-shaft machine composed of five sub-modules: [4]
The first German jet engines built during the Second World War used a mechanical APU starting system designed by the German engineer Norbert Riedel.It consisted of a 10 horsepower (7.5 kW) two-stroke flat engine, which for the Junkers Jumo 004 design was hidden in the engine nose cone, essentially functioning as a pioneering example of an auxiliary power unit for starting a jet engine.
Diagram of a typical gas turbine jet engine Frank Whittle Hans von Ohain. The turbojet is an airbreathing jet engine which is typically used in aircraft. It consists of a gas turbine with a propelling nozzle. The gas turbine has an air inlet which includes inlet guide vanes, a compressor, a combustion chamber, and a turbine (that drives the ...