Search results
Results From The WOW.Com Content Network
The pour point (ASTM D97 [12]) measures the temperature at which a base oil no longer flows. For paraffinic base oils, pour points are usually between −12 °C and −15 °C, and are determined by operation of the dewaxing unit. The pour points of naphthenic base oils, generally devoid of wax content, may be much lower (down to <−70 °C). [10]
Naphtha (/ ˈ n æ f θ ə /, recorded as less common or nonstandard [1] in all dictionaries: / ˈ n æ p θ ə /) is a flammable liquid hydrocarbon mixture.Generally, it is a fraction of crude oil, but it can also be produced from natural-gas condensates, petroleum distillates, and the fractional distillation of coal tar and peat.
Petroleum naphtha is an intermediate hydrocarbon liquid stream derived from the refining of crude oil [1] [2] [3] with CAS-no 64742-48-9. [4] It is most usually desulfurized and then catalytically reformed, which rearranges or restructures the hydrocarbon molecules in the naphtha as well as breaking some of the molecules into smaller molecules to produce a high-octane component of gasoline (or ...
An improvement to the refining process in the 1960s called hydro-treating made this base oil more stable, less reactive, and longer lasting than the earlier base oils. API defines group I as "base stocks contain less than 90 percent saturates and/or greater than 0.03 percent sulfur and have a viscosity index greater than or equal to 80 and less ...
Copper naphthenate free of any solvent has a copper content ranging from 10-13% by weight, depending on the acid number/molecular weight of the naphthenic acid used. The properties of copper naphthenate treating solutions are dependent on the type of oil used as the carrier.
The K factor or characterization factor is defined from Rankine boiling temperature °R=1.8Tb[k] and relative to water density ρ at 60°F: . K(UOP) = / The K factor is a systematic way of classifying a crude oil according to its paraffinic, naphthenic, intermediate or aromatic nature. 12.5 or higher indicate a crude oil of predominantly paraffinic constituents, while 10 or lower indicate a ...
The term "mineral oil" is used to refer to lubricating base oils derived from crude oil. The American Petroleum Institute (API) designates several types of lubricant base oil: [6] Group I – Saturates < 90% and/or sulfur > 0.03%, and Society of Automotive Engineers (SAE) viscosity index (VI) of 80 to 120
where U is the oil's kinematic viscosity at 40 °C (104 °F), Y is the oil's kinematic viscosity at 100 °C (212 °F), and L and H are the viscosities at 40 °C for two hypothetical oils of VI 0 and 100 respectively, having the same viscosity at 100 °C as the oil whose VI we are trying to determine.