Search results
Results From The WOW.Com Content Network
An overhead valve engine, abbreviated (OHV) and sometimes called a pushrod engine, is a piston engine whose valves are located in the cylinder head above the combustion chamber. This contrasts with flathead (or "sidevalve") engines , where the valves were located below the combustion chamber in the engine block .
Engines with multiple banks are shorter than straight engines of the same size, and will often have better engine balance characteristics, resulting in reduced engine vibration and potentially higher maximum engine speeds. Most engines with four or less cylinders use a straight engine layout, and most engines with eight cylinders or more use a ...
Engines that always run at a relatively high speed, such as race car engines, will have considerable overlap in their valve timings for maximum volumetric efficiency. Road car engines are different because they are required to idle at less than 1000rpm, and excessive valve overlap would make smooth idling impossible because of the mixing of ...
The Chevrolet Inline-4 engine was one of Chevrolet's first automobile engines, designed by Arthur Mason and introduced in 1913. Chevrolet founder Billy Durant, who previously had owned Buick which had pioneered the overhead valve engine, used the same basic engine design for Chevrolet: exposed pushrods and rocker arms which actuated valves in the detachable crossflow cylinder head.
The Group 1 engines were the smallest in displacement and outer dimensions, and differed most significantly from the larger Group 2 and Group 3 engines by having only four main bearings (whereas the Group 2 and 3 engines had seven) [1]: 15 and a different firing order (1-5-3-6-2-4, whereas the others are 1-4-2-6-3-5).
The Type A was an overhead-valve petrol engine based on the Chevrolet Stovebolt engine. This was followed by the first generation Toyota F overhead valve engine, which was produced from 1949 to 1975, which in turn was followed by the 2F version from 1975 to 1988 and the fuel-injected 3F / 3FE version from 1988 to 1992.
A cylinder head of a four valve Nissan VQ engine engine. A multi-valve or multivalve engine is one where each cylinder has more than two valves (an intake, and an exhaust).A multi-valve engine has better breathing, and with more smaller valves (having less mass in motion) may be able to operate at higher revolutions per minute (RPM) than a two-valve engine, delivering more power.
The disadvantages of crank and camshaft twisting were not considered at this time, since aircraft engines of the time ran at low speeds to keep propeller tip speed below the speed of sound. Unlike the V8 engine configuration, examples of which were used in De Dion-Bouton , Scripps-Booth , and Cadillac automobiles by 1914, no straight-eight ...