Ads
related to: 1 female 2 male splitter
Search results
Results From The WOW.Com Content Network
A Y-cable common in domestic settings has a stereo 3.5mm (1/8″) stereo male minijack at one end, to plug into the line- or headphone-output of an MP3 player, mobile phone, or computer soundcard, and a pair of RCA (phono) male plugs to connect to the left and right mono inputs of an external amplifier.
The easiest way to remember it is to look at Neutrik part numbers where an "F" indicates Female and an "M denotes Male (eg "NL4FX" is the 'normal' cable connector (with a latch). Speakon connectors are designed to be unambiguous in their use in speaker cables.
The connector typically has 2 to 24 contacts and is polarized or keyed to ensure correct orientation. Pins and sockets can be arranged in any combination in a single housing, and each housing can be either male or female. There are three typical pin sizes: 1.57 mm (0.062 in), 2.13 mm (0.084 in), and 2.36 mm (0.093 in).
1A1A44J5 - Unit 1, Assembly 1, Sub-Assembly 44, Jack 5 (J5 is a connector on a box referenced as A44) 1A1A45J333 - Unit 1, Assembly 1, Sub-Assembly 45, Jack 333 (J333 is a connector on a box referenced as A45) A cable connecting these two might be: 1A1W35 - In the assembly A1 is a cable called W35. Connectors on this cable would be designated ...
The interface dimensions for SMA connectors are listed in MIL-STD-348. [5] The SMA connector employs a 1 ⁄ 4 inch diameter, 36-thread-per-inch threaded barrel. The male is equipped with a hex nut measuring 5 ⁄ 16 inch (0.3125 inch / 7.9 mm) across opposite flats, thus taking the same wrench as a #6 SAE hex nut.
A male connector (a plug), is mated into a female connector (a socket), though other terminology is used. Plugs have 2 to 5 electrical contacts. The tip contact is indented with a groove. The sleeve contact is nearest the (conductive or insulated) handle. Contacts are insulated from each other by a band of non-conductive material.