Ads
related to: wood brick molding sizes available
Search results
Results From The WOW.Com Content Network
The standard brick sizes in Mesopotamia followed a general rule: the width of the dried or burned brick would be twice its thickness, and its length would be double its width. [ 8 ] The South Asian inhabitants of Mehrgarh also constructed air-dried mudbrick structures between 7000 and 3300 BC [ 9 ] and later the ancient Indus Valley cities of ...
A stock or stock board is an iron-faced block of wood fixed to the surface of the moulder's bench. The brick mould fits over the stock; the brick maker fills the mould with prepared clay and cuts it off with a wire level with the top of the mould, before turning out the 'green' brick onto a wooden board called a pallet for drying and firing. [1]
Coordination dimensions are the actual physical dimensions of the brick with the mortar required on one header face, one stretcher face and one bed. Working dimensions is the size of a manufactured brick. It is also called the nominal size of a brick. Brick size may be slightly different due to shrinkage or distortion due to firing, etc. An ...
In this way the log is peeled into sheets of veneer, which are then cut to the desired oversize dimensions, to allow it to shrink (depending on wood species) when dried. The sheets are then patched, graded, glued together and then baked in a press at a temperature of at least 140 °C (284 °F), and at a pressure of up to 1.9 MPa (280 psi) (but ...
Timber-framed structures differ from conventional wood-framed buildings in several ways. Timber framing uses fewer, larger wooden members, commonly timbers in the range of 15 to 30 cm (6 to 12 in), while common wood framing uses many more timbers with dimensions usually in the 5- to 25-cm (2- to 10-in) range.
Bead moulding: Narrow, half-round convex moulding, when repeated forms reeding; Beading or bead: Moulding in the form of a row of half spherical beads, larger than pearling. Other forms: Bead and leaf, bead and reel, bead and spindle; Beak: Small fillet moulding left on the edge of a larmier, which forms a canal, and makes a kind of pendant. [1]