Search results
Results From The WOW.Com Content Network
The 2007 Mustang GT owner's manual specified the use of 3.0 L of non-synthetic Mercon ATF in the 3650, while the 2008 Mustang GT owner's manual now specifies the use of 3.0 L of Mercon-V ATF in the 3650. Dexron III/Mercon Non-Synthetic ATF seems to work best for pre-2005 Mustang GTs.
Changing the engine to a V6 often requires changing the bellhousing (Mitsubishi) but the Mazda trans had an integral bell. 2.6, 2.8, 2.9, and 2.9 Cosworth. Most of these were RWD car engines. Some had the same Mitsubishi manual transmission as the 2.0/2.3 but had different bellhousings. The 2.3, 2.8, and 2.9 also made it into the Ranger, and ...
In 2001, Ford added Intake Manifold Runner Control (IMRC) to the V6, increasing the engine's output to 193 hp (144 kW; 196 PS) at 5,500 rpm and 225 lb⋅ft (305 N⋅m) of torque at 2,800 rpm. [20] During the second half of the 2004 model year, the 3.8 L Essex was replaced with a slightly revised 3.9 L version with a slightly longer stroke but a ...
The first Essex V6 released was a 3.8 L version introduced for the 1982 model year as an option on the Ford Granada. Bore and stroke were 96.8 mm × 86 mm (3.81 in × 3.39 in), for a total displacement of 3,797 cc (231.7 cu in). [1] Output was 112 hp (84 kW) at 4200 rpm and 175 lb⋅ft (237 N⋅m) of torque at 2800 rpm.
The largest first-generation V6 was the 2.6 L; 155.6 cu in (2,550 cc) introduced in 1969. It had a 90 mm × 66.8 mm (3.54 in × 2.63 in) bore and stroke. Output was 125 PS (92 kW; 123 hp) and 205 N⋅m (151 lb⋅ft). Applications: 1969–1971 Ford 20M RS; 1969–1971 Ford 26M; 1970–1974 Ford Capri (Not available on UK models)
The standard engine was a 4.0 L V6 mated to a 5-speed manual transmission or an optional 5-speed automatic transmission. The V6 powertrains were unchanged from those used in 2005–2009 Mustangs. Though the 2010 Mustang V6 retained a single exhaust outlet, the diameter of the tip had been increased one-half of an inch to three inches. [54]
5.0 HO in a Ford Mustang. The 1982 model year brought a new 5.0 High Output variation of the 302. Manual-transmission equipped Mustangs and Mercury Capris were first equipped with two-barrel carburetors (1982), then a four-barrel Holley carburetor (1983–85). The block was fitted with revised, taller lifter bosses to accept roller lifters, and ...
The design of most manual transmissions for cars is that gear ratios are selected by locking selected gear pairs to the output shaft inside the transmission. This is a fundamental difference compared with a typical hydraulic automatic transmission , which uses an epicyclic (planetary) design, and a hydraulic torque converter .