Ads
related to: duralast smart jumper cables how to use them list
Search results
Results From The WOW.Com Content Network
A jumper cable connected to the positive (red) terminal. Jumper cables, also known as booster cables or jump leads, are a pair of insulated wires of sufficient capacity with alligator clips at each end to interconnect the disabled vehicle with an auxiliary source, such as another vehicle with the same system voltage or to another battery. The ...
Stranded 22AWG jump wires with solid tips. A jump wire (also known as jumper, jumper wire, DuPont wire) is an electrical wire, or group of them in a cable, with a connector or pin at each end (or sometimes without them – simply "tinned"), which is normally used to interconnect the components of a breadboard or other prototype or test circuit, internally or with other equipment or components ...
English: (1) to (4) is a safe sequence to connect jumper cables from the drained battery on the left to the working battery on the right by CMG Lee. If (2) were connected first and the loose end accidentally touches bare metal on its car, the working battery is shorted; shorting a drained battery is comparatively less risky.
Jumper cable may also refer to: Jump wire, a short electrical wire with a solid tip at each end used to interconnect the components in a breadboard; Jumper cable (vehicle), a pair of electrical cables used to jump start a vehicle; Jumper Cable, the 33rd book in the Xanth series by Piers Anthony
Red jumper on a pin header. When a jumper is placed over two or more jumper pins, an electrical connection is made between them, and the equipment is thus instructed to activate certain settings accordingly. For example, with older PC systems, CPU speed and voltage settings were often made by setting jumpers.
The DieHard brand is also used on hand tools, power tools, battery chargers, booster cables, power inverters, alkaline batteries, tires, work boots, and the batteries for Craftsman power tools. Battery chargers were initially made by Associated Equipment under the "608" model prefix, and then later Schumacher Electric under the "200" model prefix.
[2] Some codes require a bonding jumper to be pulled into non-metallic conduit or in electrical metallic tubing that may be exposed to corrosion or mechanical damage. In North American electrical codes, an important bonding jumper is found in main electrical panels, where the system neutral conductor is connected to earth ground. This must be ...
Sometimes both ends of a cable are terminated with the same gender of connector, as in many Ethernet patch cables. In other applications the two ends are terminated differently, either with male and female of the same connector (as in an extension cord), or with incompatible connectors, which is sometimes called an adapter cable.