Ad
related to: can intake manifold leak coolant be changed
Search results
Results From The WOW.Com Content Network
A leak in the head gasket - often called a "blown head gasket" - can result in a leak of coolant, the combustion gasses, or both. Blue smoke from the exhaust suggests that excess oil is entering the combustion chambers (although there are other possible causes than a head gasket leak).
However, if the part is also machined, the internal porosity will be exposed and the part will leak if pressurized. Machined die castings that need to hold fluids (intake manifolds, coolant connectors, transmission cases, pump housings and fluid power components) are routinely sealed for life using acrylic resins.
The coolant used in many liquid-cooled engines must be renewed periodically and can freeze at ordinary temperatures thus causing permanent engine damage when it expands. Air-cooled engines do not require coolant service, and do not suffer damage from freezing, two commonly cited advantages for air-cooled engines.
The intake manifold vacuum, with wide open throttle, is lower in these conditions, which causes the PCV valve to open and the crankcase gases flow to the intake system. [13] The greater flow rate of intake air during these conditions means that a greater quantity of blow-by gases can be added to the intake system without compromising the ...
Proper engine coolant and a pressurized coolant system obviate these shortcomings of water. With proper antifreeze, a wide temperature range can be tolerated by the engine coolant, such as −34 °F (−37 °C) to +265 °F (129 °C) for 50% (by volume) propylene glycol diluted with distilled water and a 15 psi pressurized coolant system.
Intake air throttling changes the amount of air sucked into the engine, which means that if a stoichiometric air-fuel mixture is desired, the amount of injected fuel has to be changed along with the intake air throttling. To do so, manifold injection systems have at least one way to measure the amount of air that is currently being sucked into ...
An inlet manifold or intake manifold (in American English) is the part of an internal combustion engine that supplies the fuel/air mixture to the cylinders. [1] The word manifold comes from the Old English word manigfeald (from the Anglo-Saxon manig [many] and feald [repeatedly]) and refers to the multiplying of one (pipe) into many.
This led to elimination of coolant flowing through a 'dry' intake manifold, a potential source of leaks and minimized unnecessary heat transfer. To perform this change, the front of the engine block was extended to include provisions for the coolant to flow through a crossover in the block.