Ads
related to: usb cassette recorder/player adapter for laptop to tv free youtube download
Search results
Results From The WOW.Com Content Network
Another type of cassette adapter is the Bluetooth cassette adapter. It has the shape of a standard cassette, but has a built-in audio Bluetooth receiver module, a simple power supply to allow charging and power and a small battery. Usually, they may power on when the cassette player is set on play, and power off when the cassette player is stopped.
The Recorder has mono sound output from a built in speaker on the top of the unit. A convenient volume control is accessible on the left hand side. The Recorder has two data ports that use a conventional 3.5mm mono phone connector. The port on the left hand side is labeled "ear" and "load". The port on the right is labeled as "Mic" and "Save".
The C2N232 adapter is a RS-232 interface that can be plugged to the cassette port of an 8-bit Commodore computer and supports emulation of the tape deck. The C2N232 hardware was designed in 2001–2003 by Marko Mäkelä. It is freely available as open source, and a few hundred were built and sold. [17]
A Sony PCM-501ES EIAJ LPCM Adapter on a Sony SL-HF360 VTR. The Sony PCM-1600 was the first commercial video-based 16-bit recorder. The 1600 (and its later versions, the 1610 and 1630) used special U-matic-format VCRs also furnished by Sony for transports, such as the BVU-200B (the first model of VCR optimized to work, and sold with, the PCM-1600 in 1979), [2] BVU-800DA, VO-5630DA, and the ...
In recorders that could be connected to a PC via USB, it was possible to transfer audio from the PC to the MiniDisc recorder, but for many years it was not possible to transfer audio in the other direction. This restriction existed in both the SonicStage software and in the MiniDisc player itself.
There are at least four main models of the 1530/C2N Datassette: The original modified Sanyo M1540A cassette drive, built into the earliest models of PET in 1977. This was a standard shoebox tape recorder with a corner of the case removed and modified electronics; a Commodore PCB was installed internally in place of the Sanyo electronics.