Search results
Results From The WOW.Com Content Network
In 3G, the most prevalent technology was UMTS with CDMA-2000 in close contention. All radio access technologies have to solve the same problems: to divide the finite RF spectrum among multiple users as efficiently as possible. GSM uses TDMA and FDMA for user and cell separation. UMTS, IS-95 and CDMA-2000 use CDMA. WiMAX and LTE use OFDM.
In theory CDMA, TDMA and FDMA have exactly the same spectral efficiency, but, in practice, each has its own challenges – power control in the case of CDMA, timing in the case of TDMA, and frequency generation/filtering in the case of FDMA. TDMA systems must carefully synchronize the transmission times of all the users to ensure that they are ...
Dynamic TDMA is a TDMA variant that dynamically reserves a variable number of time slots in each frame to variable bit-rate data streams, based on the traffic demand of each data stream. TDMA is used in the digital 2G cellular systems such as Global System for Mobile Communications (GSM), IS-136, Personal Digital Cellular (PDC) and iDEN, and in ...
True 3G systems such as EV-DO, W-CDMA (including HSPA and HSPA+) provide combined circuit switched and packet switched data and voice services from the outset, usually at far better data rates than 2G networks with their extensions. All of these services can be used to provide combined mobile voice access and Internet access at remote locations.
Frequency-division multiple access (FDMA) is a channel access method used in some multiple-access protocols. FDMA allows multiple users to send data through a single communication channel, such as a coaxial cable or microwave beam, by dividing the bandwidth of the channel into separate non-overlapping frequency sub-channels and allocating each sub-channel to a separate user.
also known as CDMA2000, the successor to 2G CDMA ; IMT-2000 CDMA TDD. also known as TD-SCDMA; IMT-2000 TDMA Single Carrier. also known as EDGE, an intermediate 2.5G technology; IMT-2000 FDMA/TDMA. also known as DECT; To meet the IMT-2000 standards, a system must provide peak data rates of at 384 kbit/s for mobile stations and 2 Mbit/s for fixed ...
The access method used for IS-54 is Time Division Multiple Access (TDMA), which was the first U.S. digital standard to be developed. It was adopted by the TIA in 1992. TDMA subdivides each of the 30 kHz AMPS channels into three full-rate TDMA channels, each of which is capable of supporting a single voice call.
IEEE 802.11b wireless local area networks (WLANs) are based on FDMA and DS-CDMA for avoiding interference among adjacent WLAN cells or access points. This is combined with CSMA/CA for multiple access within the cell. HIPERLAN/2 wireless networks combine FDMA with dynamic TDMA, meaning that resource reservation is achieved by packet scheduling.