Ads
related to: 19 kw rotax 277 diesel
Search results
Results From The WOW.Com Content Network
The Rotax 277 is a 26 hp (19 kW), single-cylinder, two-stroke aircraft engine, that was built by BRP-Rotax GmbH & Co. KG of Austria for use in ultralight aircraft.
Soon, the 19 kW (26 hp), single-cylinder Rotax 277 [11] became the most widely used engine powering U.S. ultralight aircraft (and remains, for many, the only Rotax engine they can use to adequately power the aircraft and still remain within the FAA-mandated weight limits for ultralight aircraft which can be operated without a pilot's license). [13]
The specified engine is a 19 kW (25 hp) Rotax 277 two-stroke aircraft engine, mounted aft of the cockpit and driving a pusher propeller mounted above the tail boom. The fixed mainwheels are located beside the fuselage on small sponsons. [1] [3] Even with the small Rotax 277 fitted, the takeoff and landing distance is 46 m (150.9 ft) [1]
When built as a Part 103 ultralight, the aircraft is intended to be powered by a 26 hp (19 kW) Rotax 277, 35 hp (26 kW) Rotax 377, or similar engine. Heavier and more powerful engines including the Rotax 503 may also be used, but will result in exceeding the FAR Part 103 less than 254 pound (115 kg) empty weight limit, if the aircraft is ...
The Drifter was first marketed by Maxair in the 1980s as both a single seat and two seats-in-tandem kitplane. The original single seater was light enough when fitted with the 28 hp (21 kW) Rotax 277 engine to qualify for the US FAR 103 Ultralight Vehicles category, with an empty weight of 240 lb (109 kg).
Early versions of the FP-505 were equipped with the 28 hp (21 kW) Rotax 277, and the aircraft reportedly flies well on that minimum power. Since the Rotax 277 is no longer in production, the 25 hp (19 kW) Hirth F-33 is specified along with the 40 hp (30 kW) Rotax 447 and 50 hp (37 kW) Rotax 503 engines.
The prototype was powered by a Rotax 277. Heavier engines can be installed, although the aircraft will not then meet the US FAR 103 weight requirements as an ultralight aircraft. Other engines used include the 40 hp (30 kW) Rotax 447, 35 hp (26 kW) Rotax 377, 30 hp (22 kW) 1/2 VW and the 22 hp (16 kW) Hirth F-33. [1] [2] [3] [4]
The standard powerplants provided with the Zipper kits were the JPX PUL 425 engine of 26 hp (19 kW) and the Rotax 277 of 28 hp (21 kW). Fuel capacity is 6 US gal (5 imp gal; 23 L). Fuel capacity is 6 US gal (5 imp gal; 23 L).