Ad
related to: difference between 240mm and 120mm aio camera film
Search results
Results From The WOW.Com Content Network
The 120 film format is a roll film which is nominally between 60.7 mm and 61.7 mm wide. Most modern films made today are roughly 61 mm (2.4 inches) wide. The film is held in an open spool originally made of wood with metal flanges, later with all-metal, and finally with all-plastic. The length of the film is nominally between 820 millimetres ...
For roll holder means film for cartridge roll holders, allowing roll film to be used with cameras designed to use glass plates. These were spooled with the emulsion facing outward, rather than inward as in film designed for native roll-film cameras. Types 106 to 114 were for Eastman-Walker rollholders, while types 50 to 54 were for Graflex ...
First known film is the first film (not including tests) made with the format and intended for release. Negative gauge is the film gauge (width) used for the original camera negative. Negative aspect ratio is the image ratio determined by the ratio of the gate dimensions multiplied by the anamorphic power of the camera lenses (1× in the case ...
A cartridge of Kodak 35 mm (135) film for cameras. A film format is a technical definition of a set of standard characteristics regarding image capture on photographic film for still images or film stock for filmmaking. It can also apply to projected film, either slides or movies. The primary characteristic of a film format is its size and shape.
Medium format cameras use 120 film, which yields a strip of negatives 60 mm wide, and large format cameras capture each image on a single sheet of film which may be as large as 20 x 25 cm (8 x 10 inches) or even larger. Each of these photographed images may be referred to as a negative and an entire strip or set of images may be collectively ...
One of the successor companies, ORWO FilmoTec GmbH was founded in 1998 to produce high quality black and white cinema and technical films, based in Wolfen including the Camera films UN54 and N75 (List of motion picture film stocks) which are widely re-packaged for still film use.
Cameras can then automatically determine the film speed, number of exposures and exposure tolerance. With 135 film cartridges, the DX Camera Auto Sensing code uses a 2×6 grid of rectangular contact areas on the side of the metal cartridge surface; these areas are either conductive (bare metal) or non-conductive (painted).
Film is commonly checked for broken sprocket holes before presentation, a process known as "spooling". Mechanical devices exist for this purpose, but the classic method is to place the finger and thumb of a gloved hand on the edges of the film, which is mounted on a winding bench, and to slowly run the film through the fingers, feeling for snags.