Ads
related to: audio tape thickness gauge conversion guide
Search results
Results From The WOW.Com Content Network
The first commonly available increase in tape length resulted from a reduction in backing thickness from 1.5 to 1.0 mil (38 to 25 μm) resulting in a total thickness reduction from 42 to 35 μm (1.7 to 1.4 mils), which allowed 3,600 ft (1,100 m), 1,800 ft (550 m), and 900 ft (270 m) tapes to fit on ten-and-a-half-, seven-, and five-inch reels respectively.
Remanence of audio tapes, referred to quarter-inch tape width, varies from around 1100 G for basic ferric tapes to 3500 G for Type IV tapes; [5] advertised remanence of the 1986 JVC Type IV cassette reached 4800 G. [6] Coercivity is a measure of the external magnetic flux required to magnetize the tape, and an indicator of the necessary bias level.
Digital Audio Tape (DAT or R-DAT) is a signal recording and playback medium developed by Sony and introduced in 1987. [1] In appearance it is similar to a Compact Cassette , using 3.81 mm / 0.15" (commonly referred to as 4 mm) magnetic tape enclosed in a protective shell, but is roughly half the size at 73 mm × 54 mm × 10.5 mm.
Cassette tape, a two-spool tape cassette format for analog audio recording and playback and introduced in 1963 by Philips; DC-International, a format that was created by Grundig after Phillips had abandoned an earlier format that was being created alongside the Compact Cassette; 8-track tape, continuous loop tape system introduced in 1964
The Compact Cassette, also commonly called a cassette tape, [2] audio cassette, or simply tape or cassette, is an analog magnetic tape recording format for audio recording and playback. Invented by Lou Ottens and his team at the Dutch company Philips , the Compact Cassette was released in August 1963.
A cartridge format for embedding and easy handling usual 3-inch-tape-reels with 1 ⁄ 4 inch tape, compatible to reel-to-reel audio recording in 3 + 3 ⁄ 4 ips. 1965 8-Track (Stereo-8) The inside of an 8-track cartridge Analog, 1 ⁄ 4 inch wide tape, 3 + 3 ⁄ 4 in/s, endless-loop cartridge DC-International cassette system
DASH is capable of recording two channels of audio on a quarter-inch tape, and 24 or 48 tracks on 1 ⁄ 2-inch-wide (13 mm) tape [1] [2] [3] on open reels of up to 14 inches. The data is recorded on the tape linearly, [ 4 ] with a stationary recording head , [ 5 ] as opposed to the DAT format, where data is recorded helically with a rotating ...
The tape that was used in production cassettes was chromium dioxide- or cobalt-doped ferric oxide, 3–4 μm thick in a total tape thickness of 12 μm, [9] identical to the tape that was widely in use for video tapes.