Ads
related to: metric leveling rod
Search results
Results From The WOW.Com Content Network
Topographer's rods are special purpose rods used in topographical surveys. The rod has the zero mark at mid-height and the graduations increase in both directions away from the mid-height. In use, the rod is adjusted so that the zero point is level with the instrument (or the surveyor's eye if he is using a hand level for low-resolution work).
The rod is used in levelling procedures to determine elevations and is read using a level. A Philadelphia rod consists of two sliding sections graduated in hundredths of a foot. On the front of the rod the graduation increasing from zero at the bottom. On the back of the rod the graduation decrease from 13.09 ft at the bottom to 7 ft.
Stadia marks on a crosshair while viewing a metric levelling rod or staff. The top mark is at 1,500 mm and the lower is at 1,345 mm; the distance between those two marks is 155 mm, yielding a distance to the rod of 15.5 m.
Stadia marks on a crosshair while viewing a metric levelling rod. The top mark is at 1.500 m and the lower is at 1.345 m. The difference between the rod readings is 0.155 m, yielding a distance to the rod of 15.5 m. A typical surveyor's instrument reticle has two pairs of stadia marks. One pair are on the horizontal centreline and the other on ...
The rod, perch, or pole (sometimes also lug) is a surveyor's tool [1] and unit of length of various historical definitions. In British imperial and US customary units, it is defined as 16 + 1 ⁄ 2 feet, equal to exactly 1 ⁄ 320 of a mile, or 5 + 1 ⁄ 2 yards (a quarter of a surveyor's chain), and is exactly 5.0292 meters.
An Ordnance Survey cut mark in the UK Occasionally a non-vertical face, and a slightly different mark, was used. The term benchmark, bench mark, or survey benchmark originates from the chiseled horizontal marks that surveyors made in stone structures, into which an angle iron could be placed to form a "bench" for a leveling rod, thus ensuring that a leveling rod could be accurately ...
When using the stadia measuring method, a level staff or stadia rod is held so that it appears between two stadia marks visible on the instrument's reticle. The stadia rod has measurements written on it that can be read through the telescope of the instrument, providing a known remote height for the distance calculations.
The Y level or wye level is the oldest and bulkiest of the older style optical instruments. A low-powered telescope is placed in a pair of clamp mounts, and the instrument then leveled using a spirit level, which is mounted parallel to the main telescope. The term dumpy level (also builder's level) endures despite the evolution in design. They ...