Search results
Results From The WOW.Com Content Network
pound (avoirdupois) per cubic foot lb/ft 3: ≡ lb/ft 3: ≈ 16.018 463 37 kg/m 3: pound (avoirdupois) per cubic inch lb/in 3: ≡ lb/in 3: ≈ 2.767 990 471 × 10 4 kg/m 3: pound (avoirdupois) per gallon (imperial) lb/gal ≡ lb/gal ≈ 99.776 372 66 kg/m 3: pound (avoirdupois) per gallon (US fluid) lb/gal ≡ lb/gal ≈ 119.826 4273 kg/m 3 ...
1 gal (alcohol) = 0.15 gal (gasoline) 100 ft 3 (natural gas) = 0.823 gal-equivalent (natural gas) 1 gal-equivalent (natural gas) = 0.15 gal (gasoline) A dedicated AFV which operates solely on alcohol would divide the alcohol fuel economy by the energy-equivalency factor of 0.15.
The IEEE symbol for the cubic foot per second is ft 3 /s. [1] The following other abbreviations are also sometimes used: ft 3 /sec; cu ft/s; cfs or CFS; cusec; second-feet; The flow or discharge of rivers, i.e., the volume of water passing a location per unit of time, is commonly expressed in units of cubic feet per second or cubic metres per second.
{{convert|123|cuyd|m3+board feet}} → 123 cubic yards (94 m 3; 40,000 board feet) The following converts a pressure to four output units. The precision is 1 (1 decimal place), and units are abbreviated and linked.
One GGE of natural gas is 126.67 cubic feet (3.587 m 3) at standard conditions. This volume of natural gas has the same energy content as one US gallon of gasoline (based on lower heating values: 900 BTU/cu ft (9.3 kWh/m 3) of natural gas and 114,000 BTU/US gal (8.8 kWh/L) for gasoline). [22]
1.0 cu yd (0.76 m 3) cubic foot: cuft (cufoot) cu ft long code "cufoot" outputs cubic foot (and never feet) 1.0 cu ft (0.028 m 3) cubic inch: cuin cu in 1.0 cu in (16 cm 3) Imperial: imperial barrel: impbbl imp bbl 36 imp gal 1.0 imp bbl (160 L; 36 imp gal; 43 US gal) imperial bushel: impbsh imp bsh 8 imp gal
Oil conversion factor from m³ to bbl (or stb) is 6.28981100; Gas conversion factor from standard m³ to scf is 35.314666721; Note that the m³ gas conversion factor takes into account a difference in the standard temperature base for measurement of gas volumes in metric and imperial units.
By default, the output value is rounded to adjust its precision to match that of the input. An input such as 1234 is interpreted as 1234 ± 0.5, while 1200 is interpreted as 1200 ± 50, and the output value is displayed accordingly, taking into account the scale factor used in the conversion.