Search results
Results From The WOW.Com Content Network
Meteorological data includes wind speeds which may be expressed as statute miles per hour, knots, or meters per second. Here are the conversion factors for those various expressions of wind speed: 1 m/s = 2.237 statute mile/h = 1.944 knots 1 knot = 1.151 statute mile/h = 0.514 m/s 1 statute mile/h = 0.869 knots = 0.447 m/s. Note:
Stone, 16 cubic feet (0.453 m 3) Salt, 42 US bushels (1.480 m 3) Lime, 40 US bushels (1.410 m 3) Coke, 28 US bushels (0.99 m 3) Wheat, 20 US bushels (0.705 m 3) The nearest thing to a standard cubic ton seems to be the "timber" cubic ton (40 cubic feet or 1.133 cubic metres) which is used by freight transport operators in the US. [1] [2]
Metric regions commonly use the tonne of oil equivalent (toe), or more often million toe (Mtoe). Since this is a measurement of mass, any conversion to barrels of oil equivalent depends on the density of the oil in question, as well as the energy content. Typically 1 tonne of oil has a volume of 1.08 to 1.19 cubic metres (6.8 to 7.5 bbl).
Oil conversion factor from m³ to bbl (or stb) is 6.28981100 Gas conversion factor from standard m³ to scf is 35.314666721 Note that the m³ gas conversion factor takes into account a difference in the standard temperature base for measurement of gas volumes in metric and imperial units.
Conversions between units in the metric system are defined by their prefixes (for example, 1 kilogram = 1000 grams, 1 milligram = 0.001 grams) and are thus not listed in this article. Exceptions are made if the unit is commonly known by another name (for example, 1 micron = 10 −6 metre).
Environmental agencies in the USA often use the terms "dscf" or "scfd" to denote a "standard" cubic foot of dry gas. Likewise, they often use the terms "dscm" or "scmd" to denote a "standard" cubic meter of gas. Since there is no universally accepted set of "standard" temperature and pressure, such usage can be and is very confusing.
For practical purposes the displacement ton (DT) is a unit of volume, 35 cubic feet (0.9911 m 3), the approximate volume occupied by one ton of seawater (the actual volume varies with salinity and temperature). [16] It is slightly less than the 224 imperial gallons (1.018 m 3) of the water ton (based on distilled water).
US spelling: cubic hectometer: 1.0 hm 3 (35,000,000 cu ft) cubic decametre: dam3 dam 3: US spelling: cubic dekameter: 1.0 dam 3 (35,000 cu ft) cubic metre: m3 m 3: US spelling: cubic meter one kilolitre 1.0 m 3 (35 cu ft) cubic decimetre: dm3 dm 3: US spelling: cubic decimeter one litre 1.0 dm 3 (61 cu in) cubic centimetre: cm3 cm 3: US ...