Ads
related to: pipe notchers and dies set of 1 1/4 1/2 metal plate images free
Search results
Results From The WOW.Com Content Network
A draw plate is type of die consisting of a hardened steel plate with one or more tapered holes through which wire is drawn to make it thinner. A typical plate will have twenty to thirty holes, so a wide range of diameters can be drawn. [1]
[2] [3] A much more accurate way of notching the end of tube stock is to use a specially made milling cutter called an end mill. The stock to be notched is clamped into a vise and can then be fed slowly and accurately into a rotating, hardened metal, end mill. The equipment required for this method is considerably more expensive than the hole ...
Punch Holder: This plate is used to accommodate the punches of press tool. Punches : To perform cutting and non cutting operations either plain or profiled punches are used. Die Plate: Die plate will have similar profile of the component where cutting dies usually have holes with land and angular clearance and non cutting dies will have profiles.
A die cuts an external thread on cylindrical material, such as a rod, which creates a male threaded piece that functions like a bolt. Dies are generally made in two styles: solid and adjustable. An adjustable die may be adjusted either by an integrated screw or by a set of screws set in to the die holder (termed a "die stock").
[4] Die set (plates). [5] Placement can be inverted depending on the operation, such as use of a knock-out: [6] Die block – the lower (bottom) half of the die set. Machined to conform to the desired shape of the workpiece being formed or cut. Punch plate – the upper (top) half of the die set. Holds and supports the different punches in place.
A typical compound fine blanking press includes a hardened die punch (male), the hardened blanking die (female), and a guide plate of similar shape/size to the blanking die. The guide plate is the first applied to the material, impinging the material with a sharp protrusion or stinger around the perimeter of the die opening. Next, a counter ...