Search results
Results From The WOW.Com Content Network
Sharp Corners general design guidelines in injection molding suggest that corner radii should be at least one-half the wall thickness. It is recommended to avoid sharp corners and use generous fillets and radii whenever required. During injection molding, the molten plastic has to navigate turns or corners.
Bed-mould or bed moulding: Narrow moulding used at the junction of a wall and ceiling, found under the cornice, of which it is a part. [2] Similar to crown moulding, a bed mould is used to cover the joint between the ceiling and wall. Bed moulds can be either sprung or plain, or flush to the wall as an extension of a cornice mould. [3]
This template trims leading and trailing (but not interior) whitespace from a string. The string should be passed as the first unnamed parameter. The parameter must be named |1= if its value contains a = character. You may substitute this template—that is, if this template is used as {}, the resulting wikicode is "clean".
A compound crown molding built up out of several individual trim elements Decorative pilaster of natural cherry hardwood topped with crown molding Crown molding may be a complex build-up of multiple trim elements, in this case built-out slightly above a window with short 90-degree returns The relief on this short 90-degree return of crown molding was back-cut with a coping saw
Transfer molding (BrE: transfer moulding) is a manufacturing process in which casting material is forced into a mold. Transfer molding is different from compression molding in that the mold is enclosed [ 1 ] rather than open to the fill plunger resulting in higher dimensional tolerances and less environmental impact. [ 2 ]
The trend towards thin wall molding continues to increase in many plastic industries as plastic material and energy costs continue to rise and delivery lead times are squeezed. [2] The following industries make use of thin wall molding: food packaging ( e.g. food containers and lids) [3] automotive (e.g. both structural and non-structural car ...
Blow molding is a manufacturing process for forming and joining hollow plastic or glass parts. A manufacturer who makes molds is called a moldmaker . A release agent is typically used to make removal of the hardened/set substance from the mold more easily effected.
You are free: to share – to copy, distribute and transmit the work; to remix – to adapt the work; Under the following conditions: attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses ...