Search results
Results From The WOW.Com Content Network
megagram (metric ton) per cubic metre (Mg/m 3) In US customary units density can be stated in: Avoirdupois ounce per cubic inch (1 g/cm 3 ≈ 0.578036672 oz/cu in) Avoirdupois ounce per fluid ounce (1 g/cm 3 ≈ 1.04317556 oz/US fl oz = 1.04317556 lb/US fl pint) Avoirdupois pound per cubic inch (1 g/cm 3 ≈ 0.036127292 lb/cu in)
If the soil has more than 15% by weight retained on a #4 sieve (R #4 > 15%), there is a significant amount of gravel, and the suffix "with gravel" may be added to the group name, but the group symbol does not change. For example, SP-SM could refer to "poorly graded SAND with silt" or "poorly graded SAND with silt and gravel."
Other grades are UAN 28, UAN 30 and UAN 18. The solutions are quite corrosive towards mild steel (up to 0.5 inches (1.3 cm) per year on C1010 steel) and are therefore generally equipped with a corrosion inhibitor to protect tanks, pipelines, nozzles, etc. Urea–ammonium nitrate solutions should not be combined with calcium ammonium nitrate ...
At 15.6 °C (60.1 °F), the density of a saturated solution is 0.88 g/ml; it contains 35.6% ammonia by mass, 308 grams of ammonia per litre of solution, and has a molarity of approximately 18 mol/L. At higher temperatures, the molarity of the saturated solution decreases and the density increases. [ 8 ]
The total or sum of the baker's percentages is called the formula percentage. The sum of the ingredient masses is called the formula mass (or formula "weight"). Here are some interesting calculations: The flour's mass times the formula percentage equals the formula mass: [11]
Saharan dust (also African dust, yellow dust, yellow sand, yellow wind or Sahara dust storms) is an aeolian mineral dust from the Sahara, the largest hot desert in the world. The desert spans just over 9 million square kilometers, from the Atlantic Ocean to the Red Sea , from the Mediterranean Sea to the Niger River valley and the Sudan region ...
The hazards of ammonia solutions depend on the concentration: 'dilute' ammonia solutions are usually 5–10% by weight (< 5.62 mol/L); 'concentrated' solutions are usually prepared at >25% by weight. A 25% (by weight) solution has a density of 0.907 g/cm 3 , and a solution that has a lower density will be more concentrated.
A large part of oil sands mining operations involves clearing trees and brush from a site and removing the overburden—topsoil, muskeg, sand, clay and gravel—that sits atop the oil sands deposit. [146] Approximately 2.5 tons of oil sands are needed to produce one barrel of oil (roughly 1 ⁄ 8 of a ton). [147]