Search results
Results From The WOW.Com Content Network
The Crookes radiometer (also known as a light mill) consists of an airtight glass bulb containing a partial vacuum, with a set of vanes which are mounted on a spindle inside. The vanes rotate when exposed to light, with faster rotation for more intense light, providing a quantitative measurement of electromagnetic radiation intensity.
Diagram showing displacement of the Sun's image at sunrise and sunset Comparison of inferior and superior mirages due to differing air refractive indices, n. Atmospheric refraction is the deviation of light or other electromagnetic wave from a straight line as it passes through the atmosphere due to the variation in air density as a function of height. [1]
The Sun appeared to rise two weeks earlier than expected; the real Sun had still been below the horizon, but its light rays followed the curvature of Earth. This effect is often called a Novaya Zemlya mirage. For every 111.12 kilometres (69.05 mi) that light rays travel parallel to Earth's surface, the Sun will appear 1° higher on the horizon.
Two systems are common: plasma lamps, in which microwaves or radio waves, energizes a bulb filled with sulfur vapor [1] or metal halides, and fluorescent induction lamps, which are like a conventional fluorescent lamp bulb that induces current with an external or an internal coil of wire via electromagnetic induction.
A passive infrared detector mounted on circuit board (right), along with photoresistive detector for visible light (left). This is the type most commonly encountered in household motion sensing devices and is designed to turn on a light only when motion is detected and when the surrounding environment is sufficiently dark.
The primary cause of a buzzing LED light bulb is a discrepancy between the bulb wattage and that of the switch or dimmer. While this isn't dangerous, it can be really annoying.
The vessel is placed on a base containing an incandescent light bulb whose heat causes temporary reductions in the wax's density and the liquid's surface tension. As the warmed wax rises through the liquid, it cools, loses its buoyancy, and falls back to the bottom of the vessel in a cycle that is visually suggestive of pāhoehoe lava , hence ...
Nernst lamps did not use a glowing tungsten filament. Instead, they used a ceramic rod that was heated to incandescence.Because the rod (unlike tungsten wire) would not further oxidize when exposed to air, there was no need to enclose it within a vacuum or noble gas environment; the burners in Nernst lamps could operate exposed to the air and were only enclosed in glass to isolate the hot ...