Search results
Results From The WOW.Com Content Network
An example of this would be using DCO to make an 80-gigabyte HDD appear as a 60-gigabyte HDD to both the (OS) and the BIOS.... Given the potential to place data in these hidden areas, this is an area of concern for computer forensics investigators. An additional issue for forensic investigators is imaging the HDD that has the HPA and/or DCO on ...
In addition, HP has introduced a USB floppy drive key, an ordinary USB flash drive with the capacity to emulate floppy drives, allowing it to be used for updating system firmware where direct use of USB flash drives is not supported. The desired mode of operation, regular USB mass storage device or floppy drive emulation, is selected via ...
The original motivation for EFI came during early development of the first Intel–HP Itanium systems in the mid-1990s. BIOS limitations (such as 16-bit real mode, 1 MB addressable memory space, [7] assembly language programming, and PC AT hardware) had become too restrictive for the larger server platforms Itanium was targeting. [8]
UAS was introduced as part of the USB 3.0 standard, but can also be used with devices complying with the slower USB 2.0 standard, assuming use of compatible hardware, firmware and drivers. UAS was developed to address the shortcomings of the original USB Mass Storage Bulk-Only Transport protocol, i.e., an inability to perform command queueing ...
Gigabyte DualBIOS PLCC32 A detached BIOS chip. EEPROM and flash memory chips are advantageous because they can be easily updated by the user; it is customary for hardware manufacturers to issue BIOS updates to upgrade their products, improve compatibility and remove bugs. However, this advantage had the risk that an improperly executed or ...
BIOS POST card for ISA bus BIOS POST card for PCI bus Professional BIOS POST card for PCI bus Two POST seven-segment displays integrated on a computer motherboard. The original IBM BIOS made POST diagnostic information available by outputting a number to I/O port 0x80 (a screen display was not possible with some failure modes). Both progress ...
To set up a live USB system for commodity PC hardware, the following steps must be taken: A USB flash drive needs to be connected to the system, and be detected by it; One or more partitions may need to be created on the USB flash drive; The "bootable" flag must be set on the primary partition on the USB flash drive
A driver provides a software interface to hardware devices, enabling operating systems and other computer programs to access hardware functions without needing to know precise details about the hardware being used. A driver communicates with the device through the computer bus or communications