Search results
Results From The WOW.Com Content Network
The ADAT Lightpipe, officially the ADAT Optical Interface, is a standard for the transfer of digital audio between equipment. It was originally developed by Alesis but has since become widely accepted, [1] with many third party hardware manufacturers including Lightpipe interfaces on their equipment.
Many material or standard specifications include a number of different UNS numbers that may be used within that specification. For example: UNS S30400 (SAE 304, Cr/Ni 18/10, Euronorm 1.4301 stainless steel) could be used to make stainless steel bars ( ASTM A276 ) or stainless steel plates for pressure vessels ( ASTM A240 ) or pipes ( ASTM A312 ).
The 16 Divisions of construction, as defined by the Construction Specifications Institute (CSI)'s MasterFormat, is the most widely used standard for organizing specifications and other written information for commercial and institutional building projects in the U.S. and Canada.
The pipe contents must be identified adjacent to the banding. [2] This can be done by giving either: The full name; Abbreviation; Chemical symbol; Refrigerant number; Coloured bands (user specified) The direction of flow should also be identified near the banding. [2] Examples using this system are as shown. Examples of pipe marking using BS 7010
Both pipe and tube imply a level of rigidity and permanence, whereas a hose is usually portable and flexible. A tube and pipe may be specified by standard pipe size designations, e.g., nominal pipe size, or by nominal outside or inside diameter and/or wall thickness. The actual dimensions of pipe are usually not the nominal dimensions: A 1-inch ...
Standard Number Title AWS A2.4: Standard symbols for welding, brazing, and non-destructive examination AWS A3.0: Standard welding terms and definitions AWS A5.1: Specification for carbon steel electrodes for shielded metal arc welding AWS A5.18: Specification for carbon steel electrodes and rods for gas shielded arc welding AWS B1.10
The system is a catalogue of specifications in the English language, to allow buyers to purchase standardised materials all over the world. When MESC was initially introduced, materials were allocated a unique 7-digit number. This was increased to ten digits in 1946. [1] The system has a numerical "coding schedule" of 10 digits to code the ...
The only way to obtain the actual OD is to look it up in a reference table. For pipe sizes of NPS 14 inch (DN 350) and greater the NPS size is the actual diameter in inches and the DN size is equal to NPS times 25 (not 25.4) rounded to a convenient multiple of 50. For example, NPS 14 has an OD of 14 inches or 355.60 millimetres, and is ...