When.com Web Search

  1. Ads

    related to: actual 2 inch thick lumber

Search results

  1. Results From The WOW.Com Content Network
  2. Lumber - Wikipedia

    en.wikipedia.org/wiki/Lumber

    In 1961, at a meeting in Scottsdale, Arizona, the Committee on Grade Simplification and Standardization agreed to what is now the current U.S. standard: in part, the dressed size of a 1-inch (nominal) board was fixed at 3 ⁄ 4 inch; while the dressed size of 2 inch (nominal) lumber was reduced from 1 + 5 ⁄ 8 inch to the current 1 + 1 ⁄ 2 ...

  3. Board foot - Wikipedia

    en.wikipedia.org/wiki/Board_foot

    The board foot or board-foot is a unit of measurement for the volume of lumber in the United States and Canada. [1] It equals the volume of a board that is one foot (30.5 cm) in length, one foot in width, and one inch (2.54 cm) in thickness, or exactly 2.359 737 216 liters. Board foot can be abbreviated as FBM (for "foot, board measure"), BDFT ...

  4. Laminated veneer lumber - Wikipedia

    en.wikipedia.org/wiki/Laminated_veneer_lumber

    In 1971 "Micro=Lam LVL" was introduced. "Micro=Lam LVL" consisted of laminated veneer lumber billets 4 feet (1.2 m) wide, 3 + 1 ⁄ 2 inches (89 mm) thick, and 80 feet (24 m) long. Troutner proved the structural capabilities of his Micro=Lam product by building a house in Hagerman, Idaho, using beams made of Micro=Lam.

  5. Parallel-strand lumber - Wikipedia

    en.wikipedia.org/wiki/Parallel-strand_lumber

    The beams are continuously formed, so the length of the beam is limited only to the maximum length that can be handled and transported. Typical widths are 3 + 1 ⁄ 2, 5 + 1 ⁄ 4 or 7 inches (89, 133 or 178 mm); typical depths are 9 + 1 ⁄ 2, 11 + 7 ⁄ 8, 14, 16 and 18 inches (240, 300, 360, 410 and 460 mm). Typically the beams are made to a ...

  6. Janka hardness test - Wikipedia

    en.wikipedia.org/wiki/Janka_hardness_test

    Lumber stocks tested range from 1" to 2" (25–50 mm) thick. The tabulated Janka hardness numbers are an average. There is a standard deviation associated with each species, but these values are not given. [citation needed] No testing was done on actual flooring.

  7. Standard (timber unit) - Wikipedia

    en.wikipedia.org/wiki/Standard_(timber_unit)

    The timber would be typically called battens (7 inches wide), deals (above 7, usually 9 inches wide) and planks (11 inches wide); boards were under 2 inches thick. [3] [4] The standard hundred of the Russian capital of Saint Petersburg was 120 boards which were 12 feet long, 1 1 ⁄ 2 inches thick and 11 inches wide – a volume of 165 cubic ...