Search results
Results From The WOW.Com Content Network
Decomposition of the quad-dotted IPv4 address representation to its binary value. IPv4 uses 32-bit addresses which limits the address space to 4 294 967 296 (2 32) addresses. IPv4 reserves special address blocks for private networks (2 24 + 2 20 + 2 16 ≈ 18 million addresses) and multicast addresses (2 28 ≈ 268 million addresses).
A special case of private link-local addresses is the loopback interface. These addresses are private and link-local by definition since packets never leave the host device. IPv4 reserves the entire class A address block 127.0.0.0 / 8 for use as private loopback addresses. IPv6 reserves the single address ::1.
The Internet Engineering Task Force (IETF) has reserved the IPv4 address block 169.254.0.0 / 16 (169.254.0.0 – 169.254.255.255) for link-local addressing. [1] The entire range may be used for this purpose, except for the first 256 and last 256 addresses (169.254.0.0 / 24 and 169.254.255.0 / 24), which are reserved for future use and must not be selected by a host using this dynamic ...
Of this number, some addresses are reserved for special purposes such as private networks (≈18 million addresses) and multicast addressing (≈270 million addresses). IPv4 addresses are usually represented in dot-decimal notation , consisting of four decimal numbers, each ranging from 0 to 255, separated by dots, e.g., 192.0.2.1 .
Used for link-local addresses [5] between two hosts on a single link when no IP address is otherwise specified, such as would have normally been retrieved from a DHCP server 172.16.0.0/12 172.16.0.0–172.31.255.255
IPv4 Multicast: [39] Insert the low 23 bits of the multicast IPv4 address into the Ethernet address [40]: §2.1.1 33-33-xx locally administered. 33-33-00-00-00-00 through 33-33-FF-FF-FF-FF: 0x86DD IPv6 multicast: [41] The low 32 bits an Ethernet address for IPv6 multicast traffic are the low 32 bits of the multicast IPv6 address used.
The private address is used by the router for communicating with other devices in the private local network. The public address (typically assigned by an Internet service provider) is used by the router for communicating with the rest of the Internet. As traffic passes from the network to the Internet, the router translates the source address ...
As shown in the example below, in order to calculate the directed broadcast address to transmit a packet to an entire IPv4 subnet using the private IP address space 172.16.0.0 / 12, which has the subnet mask 255.240.0.0, the broadcast address is calculated as 172.16.0.0 bitwise ORed with 0.15.255.255 = 172.31.255.255. Directed broadcasts always ...