Search results
Results From The WOW.Com Content Network
An ICOM IC-7300 Radio Tuned to the 20 Meter Band. The ICOM IC-7300 is a multimode 6 meter, 4 meter (ITU Region 1 only) and HF base station amateur radio transceiver. [1] The IC-7300 was announced to the public at the Japan Ham Fair in 2015. [2] The radio has 100 watts output on CW, SSB, and FM modulations and 25 watts of output in AM. [3]
In telecommunications, transmit-after-receive time delay is the time interval from removal of RF energy at the local receiver input until the local transmitter is automatically keyed on and the transmitted RF signal amplitude has increased to 90% of its steady-state value.
Signals are often distorted and on the lower frequencies give a curious "watery sound" to normally propagated HF signals. Peak signals usually come from the north, even if the signal originates from a station to the east or west of the receiver. This effect is most significant in the latitudes north of 45 degrees.
In telecommunications, receive-after-transmit time delay is the time interval between (a) the instant of keying off the local transmitter to stop transmitting and (b) the instant the local receiver output has increased to 90% of its steady-state value in response to an RF signal from another transmitter.
The Icom IC-V82 is a VHF handheld transceiver with coverage in the two-meter band (144–146 MHz) and a maximum output power of 7 watts. [8] It was manufactured and sold by Icom from 2004 to 2014. [9] [10] [11] Following its discontinuation, Icom issued an advisory warning about counterfeit radios, including the IC-V82.
Transmit diversity is the use of multiple transmit antennas to achieve reliability in radio communication. [1] It involves using signals that originate from two or more independent sources that have been modulated with identical information -bearing signals and that may vary in their transmission characteristics at any given instant.
A radio repeater is a combination of a radio receiver and a radio transmitter that receives a signal and retransmits it, so that two-way radio signals can cover longer distances. A repeater sited at a high elevation can allow two mobile stations, otherwise out of line-of-sight propagation range of each other, to communicate. [ 1 ]
The SINCGARS operates on any of 2320 channels between 30 and 88 megahertz (MHz) with a channel separation of 25 kilohertz (kHz). It accepts either digital or analog inputs and superimposes the signal onto a radio frequency (RF) carrier wave. In FH mode, the input changes frequency about 100 times per second over portions of the tactical VHF-FM ...