Ads
related to: 10 foot diameter steel culvert line
Search results
Results From The WOW.Com Content Network
Steel corrugated culvert with a drop on the exhaust end, northern Vermont. Culverts can be constructed of a variety of materials including cast-in-place or precast concrete (reinforced or non-reinforced), galvanized steel, aluminum, or plastic (typically high-density polyethylene). Two or more materials may be combined to form composite ...
Tunnel Construction. Tunnels are dug in types of materials varying from soft clay to hard rock. The method of tunnel construction depends on such factors as the ground conditions, the ground water conditions, the length and diameter of the tunnel drive, the depth of the tunnel, the logistics of supporting the tunnel excavation, the final use and shape of the tunnel and appropriate risk management.
The channels are formed in large metal forms that (usually) have a pre-determined channel width, depth, and slope. Like in the cast-in-place method, a metal frame is attached to the form and concrete is poured and finished in a factory atmosphere. The advantage to the pre-cast trench drain is again time savings—big time savings at the job site.
England sets maximum spacing at 90 metres (300 ft). The only exception is for sewers with diameters larger than human heights. Those can have spacing up to 200 metres (660 ft). [10] Maximum spacing of 100 metres (330 ft) is used in Scotland. [11] The 120-metre (390 ft) requirement is used in Brazil, [12] and 150-metre (490 ft) in South Africa. [13]
The four TBMs used for excavating the 57-kilometre (35 mi) Gotthard Base Tunnel, in Switzerland, had a diameter of about 9 metres (30 ft). A larger TBM was built to bore the Green Heart Tunnel (Dutch: Tunnel Groene Hart) as part of the HSL-Zuid in the Netherlands, with a diameter of 14.87 metres (48.8 ft). [33]
Consequently, the internal diameter varies, sometimes significantly, from its nominal size. Pipe dimensions are standardised to the mutually incompatible AWWA C151 ( US Customary Units ) in the United States, ISO 2531 / EN 545/598 ( metric ) in Europe, and AS/NZS 2280 (metric) in Australia and New Zealand.
It is a jointless, seamless pipe lining within an existing pipe. As one of the most widely used rehabilitation methods, CIPP has applications in sewer, water, gas, chemical and district heating pipelines ranging in diameter from 0.1 to 2.8 meters (2–110 inches).
Steel casing pipe is often specified as ASTM A-252 which is a structural grade material that does not require hydrostatic testing and the inspection requirements are not stringent and it usually costs less than other grades such as A-53, [2] A-139 or API 5L. Used natural gas line pipe is also used as casing on many projects because it is often ...