Search results
Results From The WOW.Com Content Network
IEEE 802.11 RTS/CTS (request to send/clear to send) is the optional mechanism used by the 802.11 wireless networking protocol to reduce frame collisions introduced by the hidden node problem. Originally the protocol fixed the exposed node problem as well, but later RTS/CTS does not, but includes ACKs.
Current versions of this UART by Exar claim to be able to handle up to 1.5 Mbit/s. This UART introduces the Auto-RTS and Auto-CTS features in which the RTS# signal is controlled by the UART to signal the external device to stop transmitting when the UART's buffer is full to or beyond a user-set trigger point and to stop transmitting to the ...
Devices utilizing 802.11 based standards can enjoy the benefits of collision avoidance (RTS / CTS handshake, also Point coordination function), although they do not do so by default. By default they use a Carrier sensing mechanism called exponential backoff (or Distributed coordination function ), that relies upon a station attempting to ...
Source: [1] Node D is unaware of the ongoing data transfer between node A and node B. Node D has data to send to node C, which is in the transmission range of node B. D initiates the process by sending an RTS frame to node C. Node C has already deferred its transmission until the completion of the current data transfer between node A and node B (to avoid co-channel interference at node B).
To handle the latency caused by builtin FIFOs, more advanced UARTs, like the 16950, provide "on-chip" software flow control. [1] UARTs that lack such support, like the 16550 , may suffer from buffer overruns when using software flow control, although this can be somewhat mitigated by disabling the UART's FIFO.
RTS/CTS (request to send/ clear to send) may refer to: Request to send and clear to send, flow control signals RS-232 RTS/CTS, today's [as of?] usual RS-232 hardware ...
MAX232 chip in DIP-16 package The die of a MAX232 MAX232 pinout: Red: power, Yellow: charge pump capacitors, Blue: outputs, Green: inputs, Pins 9–12: TTL/CMOS I/O voltages. The MAX232 is an integrated circuit by Maxim Integrated Products, now a subsidiary of Analog Devices, that converts signals from a TIA-232 (RS-232) serial port to signals suitable for use in TTL-compatible digital logic ...
RTS/CTS is not a complete solution and may decrease throughput even further, but adaptive acknowledgements from the base station can help too. The comparison with hidden stations shows that RTS/CTS packages in each traffic class are profitable (even with short audio frames, which cause a high overhead on RTS/CTS frames).