Search results
Results From The WOW.Com Content Network
For this reason weight distribution varies with the vehicle's intended usage. For example, a drag car maximizes traction at the rear axle while countering the reactionary pitch-up torque. It generates this counter-torque by placing a small amount of counterweight at a great distance forward of the rear axle.
The standard rail weight for British railways is now 113 lb/yd (56.1 kg/m). Before the 1990s, most diesel locomotives were built to a maximum axle load of 19 long tons (19.3 tonnes; 21.3 short tons) so the maximum locomotive weight was 76 long tons (77.2 tonnes; 85.1 short tons) for a four-axle locomotive and 114 long tons (115.8 tonnes; 127.7 short tons) for a six-axle one.
CMVs are restricted by gross weight (total weight of vehicle and cargo), and by axle weight (i.e., the weight carried by each tire). The federal weight limits for CMVs are 80,000 pounds (36,000 kg) for gross weight (unless the bridge formula dictates a lower limit), 34,000 pounds (15,000 kg) for a tandem axle, and 20,000 pounds (9,100 kg) for a ...
Dry weight is the weight of a vehicle without any consumables, passengers, or cargo. It is significantly less than the weight of a vehicle in a drivable condition and therefore rarely used. Quoting a dry weight can make a car's weight and power-to-weight figures appear far more favorable than those of rival cars using curb weight. [4] [5]
Truck (total weight 30 tonnes, 3 axles): load per axle: 10 tonnes 10 4 = 10 ⋅ 10 ⋅ 10 ⋅ 10 = 10 , 000 {\displaystyle 10^{4}=10\cdot 10\cdot 10\cdot 10=10,000} times as large The load on the road from one axle (2 wheels) is 10 times greater for a truck than for a car.
The unsprung mass (colloquially unsprung weight) of a vehicle is the mass of the suspension, wheels or tracks (as applicable), and other components directly connected to them. This contrasts with the sprung mass (or weight) supported by the suspension, which includes the body and other components within or attached to it.
The scale relays this data to a receiver hardwired into the cab, [13] or wirelessly to a handheld unit such as a smart phone, either of which will interpret the data and display axle weight(s) and/or gross vehicle weight. Data may be further transmitted via a wide area network to a company office or corporate headquarters.
Weight transfer is generally of far less practical importance than load transfer, for cars and SUVs at least. For instance in a 0.9g turn, a car with a track of 1650 mm and a CoM height of 550 mm will see a load transfer of 30% of the vehicle weight, that is the outer wheels will see 60% more load than before, and the inners 60% less.