When.com Web Search

  1. Ads

    related to: nylon sheaves for wire rope

Search results

  1. Results From The WOW.Com Content Network
  2. Arresting gear - Wikipedia

    en.wikipedia.org/wiki/Arresting_gear

    Pendants are made of wire rope with a diameter of 1, 1 + 1 ⁄ 4 or 1 + 3 ⁄ 8 inches (25, 32 or 35 mm). Each wire rope is made up of numerous strands twisted about an oiled hemp center core, which provides a "cushion" for each strand and also supplies cable lubrication.

  3. Lifting hook - Wikipedia

    en.wikipedia.org/wiki/Lifting_hook

    A lifting hook is usually equipped with a safety latch to prevent the disengagement of the lifting wire rope sling, chain or rope to which the load is attached. A hook may have one or more built-in pulley sheaves as a block and tackle to multiply the lifting force. Lifting hook attached to sheave suspended by wire rope from boom of crane

  4. Block and tackle - Wikipedia

    en.wikipedia.org/wiki/Block_and_tackle

    Typical values are 1.04 for roller bearing sheaves and 1.09 for plain bearing sheaves (with wire rope). [11] The increased force produced by a tackle is offset by both the increased length of rope needed and the friction in the system. In order to raise a block and tackle with a mechanical advantage of 6 a distance of 1 metre, it is necessary ...

  5. Wire rope - Wikipedia

    en.wikipedia.org/wiki/Wire_rope

    In stricter senses, the term wire rope refers to a diameter larger than 9.5 mm (3 ⁄ 8 in), with smaller gauges designated cable or cords. [1] Initially wrought iron wires were used, but today steel is the main material used for wire ropes. Historically, wire rope evolved from wrought iron chains, which had a record of mechanical failure.

  6. Crane (machine) - Wikipedia

    en.wikipedia.org/wiki/Crane_(machine)

    The polyspastos, when worked by four men at both sides of the winch, could readily lift 3,000 kg (6,600 lb) (3 ropes x 5 pulleys x 4 men x 50 kg or 110 lb = 3,000 kg or 6,600 lb). If the winch was replaced by a treadwheel, the maximum load could be doubled to 6,000 kg (13,000 lb) at only half the crew, since the treadwheel possesses a much ...

  7. Rope splicing - Wikipedia

    en.wikipedia.org/wiki/Rope_splicing

    Rope splicing in ropework is the forming of a semi-permanent joint between two ropes or two parts of the same rope by partly untwisting and then interweaving their strands. Splices can be used to form a stopper at the end of a line, to form a loop or an eye in a rope, or for joining two ropes together. [ 1 ]

  1. Ad

    related to: nylon sheaves for wire rope