Search results
Results From The WOW.Com Content Network
Thermally modified wood is engineered wood that has been modified by a controlled pyrolysis process of wood being heated to (> 180 °C) in an oxygen free atmosphere. This process changes to the chemical structures of wood's cell wall components lignin , cellulose and hemicellulose which decreases its hygroscopy and thus increases dimensional ...
Torrefaction is a thermochemical treatment of biomass at 200 to 320 °C (392 to 608 °F). It is carried out under atmospheric pressure and in the absence of oxygen.During the torrefaction process, the water contained in the biomass as well as superfluous volatiles are released, and the biopolymers (cellulose, hemicellulose and lignin) partly decompose, giving off various types of volatiles. [4]
Burning pieces of wood, showing various stages of pyrolysis followed by oxidative combustion. Pyrolysis is the process of thermal decomposition of materials at elevated temperatures, often in an inert atmosphere [ 1 ] without access to oxygen.
Acetylated wood is a type of modified wood that is produced through a chemical modification process. [1] It produced from a chemical reaction (named as acetylation ), involving acetic anhydride and a modification process to make wood highly resistant to biological attacks by fungi and wood-boring insects and durable to environmental conditions.
Apart from structural wood preservation measures, there are a number of different chemical preservatives and processes (also known as timber treatment, lumber treatment or pressure treatment) that can extend the life of wood, timber, and their associated products, including engineered wood. These generally increase the durability and resistance ...
This page was last edited on 6 July 2014, at 14:43 (UTC).; Text is available under the Creative Commons Attribution-ShareAlike 4.0 License; additional terms may apply ...
A solid wood floor is a floor laid with planks or battens created from a single piece of timber, usually a hardwood. Since wood is hydroscopic (it acquires and loses moisture from the ambient conditions around it) this potential instability effectively limits the length and width of the boards.
The two most prevalent shape-memory alloys are copper-aluminium-nickel and nickel-titanium (), but SMAs can also be created by alloying zinc, copper, gold and iron.Although iron-based and copper-based SMAs, such as Fe-Mn-Si, Cu-Zn-Al and Cu-Al-Ni, are commercially available and cheaper than NiTi, NiTi-based SMAs are preferable for most applications due to their stability and practicability [1 ...