Search results
Results From The WOW.Com Content Network
Wing twist is an aerodynamic feature added to aircraft wings to adjust lift distribution along the wing.. Often, the purpose of lift redistribution is to ensure that the wing tip is the last part of the wing surface to stall, for example when executing a roll or steep climb; it involves twisting the wingtip a small amount downwards in relation to the rest of the wing.
The wing is designed so that the angle of incidence is greater at the wing roots and decreases across the span, becoming lowest at the wing tip. This is usually to ensure that at stall speed the wing root stalls before the wing tips , providing the aircraft with continued aileron control and some resistance to spinning .
divergence where the aerodynamic forces increase the twist of a wing which further increases forces; control reversal where control activation produces an opposite aerodynamic moment that reduces, or in extreme cases reverses, the control effectiveness; and; flutter which is uncontained vibration that can lead to the destruction of an aircraft.
A fixed-wing aircraft may have more than one wing plane, stacked one above another: Biplane: two wing planes of similar size, stacked one above the other. The biplane is inherently lighter and stronger than a monoplane and was the most common configuration until the 1930s. The very first Wright Flyer I was a biplane.
Wing warping was an early system for lateral (roll) control of a fixed-wing aircraft or kite. The technique, used and patented by the Wright brothers , consisted of a system of pulleys and cables to twist the trailing edges of the wings in opposite directions.
Angle of incidence of an airplane wing on an airplane. On fixed-wing aircraft, the angle of incidence (sometimes referred to as the mounting angle [1] or setting angle) is the angle between the chord line of the wing where the wing is mounted to the fuselage, and a reference axis along the fuselage (often the direction of minimum drag, or where applicable, the longitudinal axis).
Camber is usually designed into an airfoil to raise its maximum lift coefficient C Lmax.This minimizes the stalling speed of aircraft using the airfoil. An aircraft with wings using a cambered airfoil will have a lower stalling speed than an aircraft with a similar wing loading and wings using a symmetric airfoil.
In aerodynamics, angle of attack specifies the angle between the chord line of the wing of a fixed-wing aircraft and the vector representing the relative motion between the aircraft and the atmosphere. Since a wing can have twist, a chord line of the whole wing may not be definable, so an alternate reference line is simply defined.