Ads
related to: female to male coaxial cable
Search results
Results From The WOW.Com Content Network
Schematic symbols for male and female connector pins. In electrical and mechanical trades and manufacturing, each half of a pair of mating connectors or fasteners is conventionally designated as male or female, [1] a distinction referred to as its gender. [2] The female connector is generally a receptacle that receives and holds the male connector.
The coaxial cable center conductor forms the pin, and cable dielectric extends up to the mating face of the connector. Thus, the male connector consists of only a body, which is generally crimped onto or screwed over the cable shielding braid, and a captive nut, neither of which require tight tolerances.
A common coaxial power connector, male (left) and female (right), 5.5 × 2.5 mm. Connector gender is determined by the center contact. Note: connectors depicted do not connect with each other.
Female Belling-Lee connector on a television set. The Belling-Lee connector (also type 9,52, but largely only in the context of its specification, IEC 61169, Part 2: Radio-frequency coaxial connector of type 9,52) [1] is commonly used in Europe, parts of Southeast Asia, and Australia, to connect coaxial cables with each other and with terrestrial VHF/UHF roof antennas, antenna signal ...
Typically the male connector is fitted to a cable, and the female to a panel on equipment. Cable connectors are often designed to be fitted by crimping [9] using a special power or manual tool. [10] [failed verification] Wire strippers which strip outer jacket, shield braid, and inner dielectric to the correct lengths in one operation are used ...
SMA connectors must not be confused with the standard household 75-ohm type F coax connector (diameters: male 7 ⁄ 16 inch (11 mm) circular or hex; female 3 ⁄ 8 inch (9.5 mm) external threads), as there is only about a 2 mm difference overall in the specifications. Type F cannot be mated with SMA connectors without the use of an adapter.
Some extended performance versions are rated to 10 GHz. The normally free part (a.k.a. plug) of a SMC connector that has a socket for the centre contact are the female connectors. The normally fixed part (a.k.a. jack) SMC connectors that has a pin for the centre contact are the male connectors. This is the reverse of most RF connectors.
An SMB jack has a male center pin, while an SMB plug has a female basket. [1] [2] Connectors are available for two SMB cable sizes: Cable 2.6/50+75 S (3 mm outer / 1.7 mm inner diameter) and; Cable 2/50 S (2.2 mm outer / 1 mm inner diameter)
Ads
related to: female to male coaxial cableebay.com has been visited by 1M+ users in the past month