Ad
related to: antenna rotor and bearing mount for ham radio system installation diagram
Search results
Results From The WOW.Com Content Network
An antenna rotator (or antenna rotor) is a device used to change the orientation, within the horizontal plane, of a directional antenna. Most antenna rotators have two parts, the rotator unit and the controller. The controller is normally placed near the equipment which the antenna is connected to, while the rotator is mounted on the antenna ...
In transmission, a radio transmitter supplies an electric current to the antenna's terminals, and the antenna radiates the energy from the current as electromagnetic waves (radio waves). In reception , an antenna intercepts some of the power of a radio wave in order to produce an electric current at its terminals, that is applied to a receiver ...
An automatic direction finder (ADF) is a marine or aircraft radio-navigation instrument that automatically and continuously displays the relative bearing from the ship or aircraft to a suitable radio station. [3] [4] ADF receivers are normally tuned to aviation or marine NDBs (Non-Directional Beacon) operating in the LW band between 190 – 535 ...
However, the klystron was quite unsuitable as it was a narrow-band device and extremely noisy [21]: 392 and the TWT, although potentially more suitable, [21]: 548 has poor matching characteristics and large bulk, which made it unsuitable for multi-channel systems using a preamplifier per antenna. However, a system has been demonstrated, in ...
An antenna array consisting of two such antennas, one above the other and driven in phase has a gain of up to 17 dBi. Being log-periodic, the antenna's main characteristics ( radiation pattern , gain, driving point impedance ) are almost constant over its entire frequency range, with the match to a 300 Ω feed line achieving a standing wave ...
Due to their omnidirectional radiation pattern, vertical monopole antennas are commonly used in terrestrial radio communication systems in which the direction to the transmitter or receiver is unknown or constantly changing, [7] such as broadcasting, mobile two-way radios, and wireless devices like cellphones and Wi-fi networks, [8] [4] because they radiate equal radio power in all horizontal ...
The J-pole antenna is an end-fed omnidirectional half-wave antenna that is matched to the feedline by a shorted quarter-wave parallel transmission line stub. [5] [1] [6] For a transmitting antenna to operate efficiently, absorbing all the power provided by its feedline, the antenna must be impedance matched to the line; it must have a resistance equal to the feedline's characteristic impedance.
Using a second set of traps, a "triband" antenna can be resonant at three different bands. Given the associated costs of erecting an antenna and rotator system above a tower, the combination of antennas for three amateur bands in one unit is a practical solution. The use of traps is not without disadvantages, however, as they reduce the ...