Ad
related to: flat top beam profile example
Search results
Results From The WOW.Com Content Network
A laser beam profiler captures, displays, and records the spatial intensity profile of a laser beam at a particular plane transverse to the beam propagation path. Since there are many types of lasers— ultraviolet , visible , infrared , continuous wave , pulsed, high-power, low-power—there is an assortment of instrumentation for measuring ...
Tophat beams are often used in industry, for example for laser drilling of holes in printed circuit boards. They are also used in very high power laser systems, which use chains of optical amplifiers to produce an intense beam. Tophat beams are named for their resemblance to the shape of a top hat.
The diameter of the multimode beam is then M times that of the embedded Gaussian beam everywhere, and the divergence is M times greater, but the wavefront curvature is the same. The multimode beam has M 2 times the beam area but 1/M 2 less beam intensity than the embedded beam. This holds true for any given optical system, and thus the minimum ...
By observing and recording the beam pattern, for example, one can infer the spatial mode properties of the beam and whether or not the beam is being clipped by an obstruction; By focusing the laser beam with a lens and measuring the minimum spot size, the number of times diffraction limit or focusing quality can be computed.
High-power lasers, such as those used in laser welding and cutting are typically measured by using a beamsplitter to sample the beam. The sampled beam has much lower intensity and can be measured by a scanning-slit or knife-edge profiler. Good beam quality is very important in laser welding and cutting operations. [5]
The equations below assume a beam with a circular cross-section at all values of z; this can be seen by noting that a single transverse dimension, r, appears.Beams with elliptical cross-sections, or with waists at different positions in z for the two transverse dimensions (astigmatic beams) can also be described as Gaussian beams, but with distinct values of w 0 and of the z = 0 location for ...
If the phase profile on SLM is flat, the SLM works effectively as a mirror. If the phase has a helical profile, the resulting beam is a Laguerre-Gaussian (LG) beam with a well-defined OAM. In real applications, there is a non-negligible admixture in the reflected beam in the form of a Gaussian beam.
In Canada, steel I-beams are now commonly specified using the depth and weight of the beam in metric terms. For example, a "W250x33" beam is approximately 250 millimetres (9.8 in) in depth (height of the I-beam from the outer face of one flange to the outer face of the other flange) and weighs approximately 33 kg/m (22 lb/ft; 67 lb/yd). [8]