Ads
related to: what does hi-v antenna mean on tv
Search results
Results From The WOW.Com Content Network
This mast has two UHF antennas for receiving signals from different directions. The lower antenna is a bowtie array. The upper antenna is a Yagi design.. UHF television broadcasting is the use of ultra high frequency (UHF) radio for over-the-air transmission of television signals.
For directional antennas, the Yagi antenna is the most widely used as a high gain or "beam" antenna. For television reception, the Yagi is used, as well as the log-periodic antenna due to its wider bandwidth. Helical and turnstile antennas are used for satellite communication since they employ circular polarization.
A short antenna pole next to a house Multiple Yagi TV aerials. Antennas are commonly placed on rooftops and sometimes in attics. Placing an antenna indoors significantly attenuates the level of the available signal. [19] [20] Directional antennas must be pointed at the transmitter they are receiving; in most cases great accuracy is not needed ...
TV 6 analog audio can be heard on FM 87.75 on most broadcast radio receivers as well as on a European TV tuned to channel 4A or channel C, but at lower volume than wideband FM broadcast stations, because of the lower deviation. Channel 1 audio is the same as European Channel 2 audio and the video is the same as European Channel 2A.
In telecommunications, [1] particularly in radio frequency engineering, signal strength refers to the transmitter power output as received by a reference antenna at a distance from the transmitting antenna. High-powered transmissions, such as those used in broadcasting, are expressed in dB-millivolts per metre (dBmV/m).
OTA antennas are digital receivers that pick up signals broadcast by local TV towers, allowing you to watch local programming without cable. These antennas cost anywhere from $15 to $50.
Most commonly, the audio and video are combined at the transmitter before being presented to the antenna, but separate aural and visual antennas can be used. In all cases where negative video is used, FM is used for the standard monaural audio; systems with positive video use AM sound and intercarrier receiver technology cannot be incorporated ...
The luminance component of a composite video signal varies between 0 V and approximately 0.7 V above the black level. In the NTSC system, there is a blanking signal level used during the front porch and back porch, and a black signal level 75 mV above it; in PAL and SECAM these are identical.