Search results
Results From The WOW.Com Content Network
Luminous efficacy can be normalized by the maximum possible luminous efficacy to a dimensionless quantity called luminous efficiency.The distinction between efficacy and efficiency is not always carefully maintained in published sources, so it is not uncommon to see "efficiencies" expressed in lumens per watt, or "efficacies" expressed as a percentage.
To help compare different orders of magnitude, the following list describes various source in lux, which is a lumen per square metre. Factor Multiple Value
White LEDs quickly matched and overtook the efficacy of standard incandescent lighting systems. In 2002, Lumileds made five-watt LEDs available with luminous efficacy of 18–22 lumens per watt (lm/W). For comparison, a conventional incandescent light bulb of 60–100 watts emits around 15 lm/W, and standard fluorescent lights emit up to 100 lm/W.
If a lamp has a 1 lumen bulb and the optics of the lamp are set up to focus the light evenly into a 1 steradian beam, then the beam would have a luminous intensity of 1 candela. If the optics were changed to concentrate the beam into 1/2 steradian then the source would have a luminous intensity of 2 candela.
Illuminance diagram with units and terminology. In photometry, illuminance is the total luminous flux incident on a surface, per unit area. [1] It is a measure of how much the incident light illuminates the surface, wavelength-weighted by the luminosity function to correlate with human brightness perception. [2]
Luminous flux (in lumens) is a measure of the total amount of light a lamp puts out. The luminous intensity (in candelas) is a measure of how bright the beam in a particular direction is. If a lamp has a 1 lumen bulb and the optics of the lamp are set up to focus the light evenly into a 1 steradian beam, then the beam would have a luminous ...
The whole detailed discussion about lumen output of 120V vs 230V lamps is off-topic for this page defining and discussing lumen. Take it to a luminous efficacy page, if there is one. Here just give an example like a "typical" candle at about 10 lm, a 100W bulb at about 1500 lm, a streetlight at 20,000-50,000 lm.
Lumen depreciation is the luminous flux lost over time, and thus the complement of lumen maintenance. [ 2 ] Lumen maintenance compares the amount of light produced from a light source or from a luminaire when it is brand new to the amount of light output at a specific time in the future.