Search results
Results From The WOW.Com Content Network
Table of saturated hydraulic conductivity (K) values found in nature. a table showing ranges of values of hydraulic conductivity and permeability for various geological materials. Values are for typical fresh groundwater conditions — using standard values of viscosity and specific gravity for water at 20 °C and 1 atm.
Hydraulic conductivity (K) is a property of soil that describes the ease with which water can move through pore spaces. It depends on the permeability of the material (pores, compaction) and on the degree of saturation. Saturated hydraulic conductivity, K sat, describes water movement through saturated media. Where hydraulic conductivity has ...
The theoretical formulation above assumes that time-dependent volume change of a soil unit only depends on changes in effective stress due to the gradual restoration of steady-state pore water pressure. This is the case for most types of sand and clay with low amounts of organic material.
According to the Unified Soil Classification System, a #4 sieve (4 openings per inch) having 4.75 mm opening size separates sand from gravel and a #200 sieve with an 0.075 mm opening separates sand from silt and clay. According to the British standard, 0.063 mm is the boundary between sand and silt, and 2 mm is the boundary between sand and gravel.
Unconsolidated sand and gravel Well sorted gravel: Well sorted sand or sand and gravel Very fine sand, silt, loess, loam: Unconsolidated clay and organic Peat: Layered clay: Unweathered clay Consolidated rocks Highly fractured rocks Oil reservoir rocks Fresh sandstone: Fresh limestone, dolomite: Fresh granite: k (cm 2) 0.001 0.0001 10 −5: 10 ...
These equations relate a change in total or water volume (or ) per change in applied stress (effective stress — or pore pressure — ) per unit volume. The compressibilities (and therefore also S s ) can be estimated from laboratory consolidation tests (in an apparatus called a consolidometer), using the consolidation theory of soil mechanics ...
Silt is mineralogically like sand but with its higher specific surface area it is more chemically and physically active than sand. But it is the clay content of soil, with its very high specific surface area and generally large number of negative charges, that gives a soil its high retention capacity for water and nutrients. [11]
In hydrogeology, a slug test is a particular type of aquifer test where water is quickly added or removed from a groundwater well, and the change in hydraulic head is monitored through time, to determine the near-well aquifer characteristics.