Ads
related to: 1x6 treated lumber home depot 2x4 studs thickness
Search results
Results From The WOW.Com Content Network
Stud. Sill plate / sole plate / bottom plate. Wall studs are framing components in timber or steel -framed walls, that run between the top and bottom plates. It is a fundamental element in frame building. The majority non- masonry buildings rely on wall studs, with wood being the most common and least-expensive material used for studs.
In modern wood construction, sills usually come in sizes of 2×4, 2×6, 2×8, and 2×10. In stick framing, the sill is made of treated lumber, and is anchored to the foundation wall, often with J-bolts, to keep the building from coming off the foundation during a severe storm or earthquake. Building codes require that the bottom of the sill ...
Studs usually consist of 1 + 1 ⁄ 2-by-3 + 1 ⁄ 2-inch (38 mm × 89 mm) or 1 + 1 ⁄ 2-by-5 + 1 ⁄ 2-inch (38 mm × 140 mm) lumber and are commonly spaced at 16 inches (410 mm) on center. This spacing may be changed to 12 or 24 inches (300 or 610 mm) on center depending on the load and the limitations imposed by the type and thickness of the ...
Lumber. Wood cut from Victorian Eucalyptus regnans. The harbor of Bellingham, Washington, filled with logs, 1972. Lumber is wood that has been processed into uniform and useful sizes (dimensional lumber), including beams and planks or boards. Lumber is mainly used for construction framing, as well as finishing (floors, wall panels, window frames).
A PSL block. Parallel-strand lumber (PSL) is a form of engineered wood made from parallel wood strands bonded together with adhesive. It is used for beams, headers, columns, and posts, among other uses. The strands in PSL are clipped veneer elements having a least dimension of not more than inch (6.4 mm) and an average length of at least 300 ...
Wood treated with this process is often used for cladding or siding, flooring, furniture and windows. For the control of pests that may be harbored in wood packaging material (i.e. crates and pallets), the ISPM 15 requires heat treatment of wood to 56 °C for 30 minutes to receive the HT stamp.