Ads
related to: 8 mhz crystal oscillator datasheet
Search results
Results From The WOW.Com Content Network
Frequencies also used are 8.6436 MHz and 17.2872 MHz. 4.332 RDS: 3648× the RDS signal bit rate of 1187.5 bit/s. While the frequency of 4.332 MHz is the most commonly used crystal resonator, its multiples (2×4.332 MHz = 8.664 MHz or 4×4.332 MHz = 17.328 MHz) have been used also. 4.43361875 PAL/NTSC: PAL B/D/G/H/I and NTSC M4.43 color subcarrier.
A crystal oscillator is an electronic oscillator circuit that uses a piezoelectric crystal as a frequency-selective element. [1] [2] [3] The oscillator frequency is often used to keep track of time, as in quartz wristwatches, to provide a stable clock signal for digital integrated circuits, and to stabilize frequencies for radio transmitters and receivers.
A ceramic resonator is an electronic component consisting of a piece of a piezoelectric ceramic material with two or more metal electrodes attached. When connected in an electronic oscillator circuit, resonant mechanical vibrations in the device generate an oscillating signal of a specific frequency. Like the similar quartz crystal, they are ...
The Pierce oscillator is a type of electronic oscillator particularly well-suited for use in piezoelectric crystal oscillator circuits. Named for its inventor, George W. Pierce (1872–1956), [1][2] the Pierce oscillator is a derivative of the Colpitts oscillator. Virtually all digital IC clock oscillators are of Pierce type, as the circuit can ...
Quartz clocks and quartz watches are timepieces that use an electronic oscillator regulated by a quartz crystal to keep time. This crystal oscillator creates a signal with very precise frequency, so that quartz clocks and watches are at least an order of magnitude more accurate than mechanical clocks. Generally, some form of digital logic ...
The STK200 starter kit and development system has a DIP socket that can host an AVR chip in a 40, 20, or 8-pin package. The board has a 4 MHz clock source, 8 light-emitting diode (LED)s, 8 input buttons, an RS-232 port, a socket for a 32 KB SRAM and numerous general I/O. The chip can be programmed with a dongle connected to the parallel port.