Search results
Results From The WOW.Com Content Network
The size of load that can be carried on a railway of a particular gauge is also influenced by the design of the rolling stock. Low-deck rolling stock can sometimes be used to carry taller 9 ft 6 in (2.9 m) shipping containers on lower gauge lines although their low-deck rolling stock cannot then carry as many containers.
The most common use of the term "track gauge" refers to the transverse distance between the inside surfaces of the two load-bearing rails of a railway track, usually measured at 12.7 millimetres (0.50 inches) to 15.9 millimetres (0.63 inches) below the top of the rail head in order to clear worn corners and allow for rail heads having sloping ...
See Narrow-gauge railways in Denmark: 686 mm: 2 ft 3 in: See List of 2 ft 3 in gauge railways: 693 mm: 2 ft 3 + 9 ⁄ 32 in: Sweden: 28 Swedish inches. [28] Several railways. 700 mm 2 ft 3 + 9 ⁄ 16 in: Denmark See Narrow-gauge railways in Denmark and Narrow-gauge railways in Europe. Common for sugar beet or sugar cane railways and peat railways.
In civil engineering, clearance refers to the difference between the loading gauge and the structure gauge in the case of railroad cars or trams, or the difference between the size of any vehicle and the width/height of doors, the width/height of an overpass or the diameter of a tunnel as well as the air draft under a bridge, the width of a lock or diameter of a tunnel in the case of watercraft.
These include simple rail adhesion, rack railways and cable inclines (including rail mounted water tanks to carry barges). To help with braking on the descent, a non-load-bearing "brake rail" located between the running rails can be used, similar to the rail used in the Fell system, e.g. by the Snaefell Mountain Railway on the Isle of Man.
The official name of this gauge is the Gabarit passe-partout international (PPI, literally "pass-everywhere international gauge"), and it came into force in 1914. The European (Berne) loading gauge is usually 3,150 mm (10 ft 4 in) wide by 3,175 mm (10 ft 5.0 in) rising to 4,280 mm (14 ft 1 in) in the centre.
In narrow curves, long cars like this 26.4 meter long express train car protrude further into the gauge than on a straight track. (180° curve near Königstein im Taunus ) A structure gauge , also called the minimum structure outline , is a diagram or physical structure that sets limits to the extent that bridges, tunnels and other ...
Track gauge conversion is the changing of one railway track gauge (the distance between the running rails) to another. In general, requirements depend on whether the conversion is from a wider gauge to a narrower gauge or vice versa, on how the rail vehicles can be modified to accommodate a track gauge conversion, and on whether the gauge conversion is manual or automated.