Ad
related to: magnetic pulse forming system for cooling air compressor model 97080 diagram
Search results
Results From The WOW.Com Content Network
A pinched aluminium can, produced from a pulsed magnetic field created by rapidly discharging 2 kilojoules from a high-voltage capacitor bank into a 3-turn coil of heavy gauge wire. Electromagnetic forming (EM forming or magneforming) is a type of high-velocity, cold forming process for electrically conductive metals, most commonly copper and ...
The magnetocaloric effect can be quantified with the following equation: = ((,)) ((,)) where is the adiabatic change in temperature of the magnetic system around temperature T, H is the applied external magnetic field, C is the heat capacity of the working magnet (refrigerant) and M is the magnetization of the refrigerant.
Figure 1: Schematic drawing of a Stirling-type single-orifice PTR. From left to right: a compressor, a heat exchanger (X 1), a regenerator, a heat exchanger (X 2), a tube (often called the pulse tube), a heat exchanger (X 3), a flow resistance (orifice), and a buffer volume. The cooling is generated at the low temperature T L. Room temperature ...
The advantage is that the cycle frequencies of the compressor and the displacer are uncoupled so that the compressor can run at power-line frequency (50 or 60 Hz) while the cycle of the cold head is 1 Hz. In this way the swept volume of the compressor can be 50 or 60 times smaller than of the cooler.
In a typical two-stage refrigerator, the first stage will offer higher cooling capacity but at higher temperature (≈ 77 K) with the second stage reaching ≈ 4.2 K and < 2.0 W of cooling power. In use, the first stage is used primarily for ancillary cooling of the cryostat with the second stage used primarily for cooling the magnet.
Illustration of the right-hand rule for the Lorentz force, cross product of an electric current with a magnetic field. The working principle involves the acceleration of an electrically conductive fluid (which can be a liquid or an ionized gas called a plasma) by the Lorentz force, resulting from the cross product of an electric current (motion of charge carriers accelerated by an electric ...
An explosively pumped flux compression generator (EPFCG) is a device used to generate a high-power electromagnetic pulse by compressing magnetic flux using high explosives. EPFCGs are physically destroyed during operation, making them single-use. They require a starting current pulse to operate, usually supplied by capacitors.
A pulse-forming network for an Nd:YAG laser rangefinder The Shiva Star device at Air Force Research Laboratory, USA, which generates pulsed power for high-energy fusion power experiments. Each of the 6 radial arms is a pulse-forming line delivering a pulse of energy to the center, whose capacitors store a total of 10 MJ of energy and can create ...