Ads
related to: a3 mount for 50x40 frame size
Search results
Results From The WOW.Com Content Network
These are also the only two SLRs that ever offered a choice of full- or half-frame exposures, switched by a lever on top of the camera. The frame size can be changed between 24×36 landscape and 18×24 portrait in mid-roll. Autorex is the name for the domestic Japanese market. In Germany the camera was also sold as Revue Auto-Reflex.
Most sizes of VESA mount have four screw-holes arranged in a square on the mount, with matching tapped holes on the device. The horizontal and vertical distance between the screw centres respectively labelled as 'A', and 'B'. The original layout was a square of 100mm. A 75 mm × 75 mm (3.0 in × 3.0 in) was defined for smaller displays.
The A3 camera consists of dual CCDs with two 300mm lenses mounted on a special motor controlled axis that is attached to the frame, a fast compression and storage unit, and a dual frequency GPS. During flight, sequences of frames are exposed in a cross-track direction at a very high speed, providing a FOV of up to 106 degrees.
The alternative Super series, denoted SnR, nR Plus or nR+, has an aspect ratio of 3∶2 (or as close as possible) and thus provides a better fit for standard 135 film (35 mm) at sizes of 8 inches or above. 5R is twice the size of a 2R print, 6R twice the size of a 4R print and S8R twice the size of 6R. 4D/6D is a newer size for most consumer ...
"Digital Technology", lenses for cameras with APS-C (or Super-35mm) size sensors, only. DT lenses will not fully illuminate the sensor/film area of 24×36mm full-frame cameras. Three DT lenses were made and sold by Konica Minolta: 11–18, 18–70, and 18–200mm. G "Gold" series, Minolta's line-up of high-grade lenses.
Sony released the following A-mount cameras since 2006. ... Full frame CMOS Auto-lock Accessory Shoe (4-pin iISO) 2.00 Professional 2009-08-27 2009-09
VESA is an organization that manages the standards for mounting solutions. In 1997, VESA came up with a standard hole size and screwing pattern for flat panel screens, called Flat Display Mounting Interface (usually known as VESA mount), which is still valid today. Almost all monitor mounts follow this VESA standard in one form or another.
DT lenses can be mounted on full-frame models like the DSLR-A850, DSLR-A900, and SLT-A99 in "crop" mode, where the frame is cropped and the resolution is roughly halved. E-mount lenses are compatible with all of the company's APS-C MILCs, from the NEX-3 and NEX-5 through the current α3000 , α5100 , α6500 , α6600, and α6700 .