Ads
related to: difference between cdma tdma fdma 3 and 2 phase converter circuit breaker
Search results
Results From The WOW.Com Content Network
In theory CDMA, TDMA and FDMA have exactly the same spectral efficiency, but, in practice, each has its own challenges – power control in the case of CDMA, timing in the case of TDMA, and frequency generation/filtering in the case of FDMA. TDMA systems must carefully synchronize the transmission times of all the users to ensure that they are ...
In 3G, the most prevalent technology was UMTS with CDMA-2000 in close contention. All radio access technologies have to solve the same problems: to divide the finite RF spectrum among multiple users as efficiently as possible. GSM uses TDMA and FDMA for user and cell separation. UMTS, IS-95 and CDMA-2000 use CDMA. WiMAX and LTE use OFDM.
R. Rom and M. Sidi (1990) [3] categorize the protocols into Conflict-free access protocols, Aloha protocols, and Carrier Sensing protocols. The Telecommunications Handbook (Terplan and Morreale, 2000) [4] identifies the following MAC categories: Fixed assigned: TDMA, FDMA+WDMA, CDMA, SDMA; Demand assigned (DA)
TDMA frame structure showing a data stream divided into frames and those frames divided into time slots. Time-division multiple access (TDMA) is a channel access method for shared-medium networks. It allows several users to share the same frequency channel by dividing the signal into different time slots. [1]
DAMA and PAMA are related only to channel/resource allocation and should not be confused with the multiple access/multiplexing methods (such as FDMA frequencies, TDMA slots, CDMA codes, or others) intended to divide a single communication channel into multiple virtual channels.
Frequency-division multiple access (FDMA) is a channel access method used in some multiple-access protocols. FDMA allows multiple users to send data through a single communication channel, such as a coaxial cable or microwave beam, by dividing the bandwidth of the channel into separate non-overlapping frequency sub-channels and allocating each sub-channel to a separate user.
This makes a round-trip-time of 464 bits. As the slot time in Ethernet is 512 bits, the difference between slot time and round-trip-time is 48 bits (6 bytes), which is the maximum jam-time. This in turn means: A station noting a collision has occurred is sending a 4 to 6 byte long pattern composed of 16 1-0 bit combinations. [note 2]
The traditional TDMA and FDMA require a lot of overhead to set a link parameter with a new user, or to detect that a user left and their allocation is free to be allocated to another. In CDMA or QDMA, a new user is simply allocated a new code and is ready to go.