Search results
Results From The WOW.Com Content Network
An American football field, including both end zones, is 360 by 160 ft (120.0 by 53.3 yd; 109.7 by 48.8 m), or 57,600 square feet (5,350 m 2) (0.535 hectares or 1.32 acres). A Canadian football field is 65 yards (59 m) wide and 110 yards (100 m) long with end zones adding a combined 40 yards (37 m) to the length, making it 87,750 square feet ...
Today in the United States, a half-foolscap sized paper for printing is standardized to 8 + 1 ⁄ 2 by 14 inches (216 mm × 356 mm), widely available and sold as "legal sized paper" for printing, writing, note-taking etc. A full foolscap size paper of 14 by 17 inches (356 mm × 432 mm) is also widely available for arts and crafts etc. alongside ...
The most used of this series is the size A4, which is 210 mm × 297 mm (8.27 in × 11.7 in) and thus almost exactly 1 ⁄ 16 square metre (0.0625 m 2; 96.8752 sq in) in area. For comparison, the letter paper size commonly used in North America ( 8 + 1 ⁄ 2 in × 11 in; 216 mm × 279 mm) is about 6 mm ( 0.24 in ) wider and 18 mm ( 0.71 in ...
1.0 mm – 0.03937 inches or 5/127 (exactly) 1.0 mm – side of a square of area 1 mm²; 1.0 mm – diameter of a pinhead; 1.5 mm – average length of a flea [27] 2.54 mm – distance between pins on old dual in-line package (DIP) electronic components; 5 mm – length of an average red ant; 5 mm – diameter of an average grain of rice
The following table is adapted from the scale of the American Library Association, [1] [9] which uses a basis sheet of 19-by-25-inch (483 by 635 mm) [10] which is, confusingly if not explained by the source, half the text/book stock sheet of 25-by-38-inch (635 by 965 mm), and in which size refers to the dimensions of the cover (trimmed pages ...
The three-by-five 三五判 (3×5 or 3/5), where the final size at 32K is slightly less than 3 by 5 sun, often given as 84 × 148 mm which would be approximately 2.8 × 4.9 sun. The 4/6 standard has given rise to newer metric book-size standards, including:
4 in × 1 in × 5 + 3 ⁄ 4 in (102 mm × 25 mm × 146 mm) = 377 cm 3. This smaller form factor is similar to that used in an HDD by Rodime in 1983, which was the same size as the "half height" 3 + 1 ⁄ 2 in (89 mm) FDD, i.e., 1.63 inches (41 mm) high.
The traditional typographic units are based either on non-metric units, or on odd multiples (such as 35 ⁄ 83) of a metric unit.There are no specifically metric units for this particular purpose, although there is a DIN standard sometimes used in German publishing, which measures type sizes in multiples of 0.25 mm, and proponents of the metrication of typography generally recommend the use of ...